Related papers: Geometrical Variation Analysis of an Electrotherma…
This paper concerns the experimental validation of some mathematical models previously developed by the authors, to predict the static behaviour of microelectrostatic actuators, basically free-clamped microbeams. This layout is currently…
We have fabricated Pt-containing granular metals by focused electron beam induced deposition from the $(CH_3)_3CH_3C_5H_4Pt$ precursor gas. The granular metals are made of platinum nanocrystallites embedded in a carbonaceous matrix. We have…
Finite element modeling (FEM) is a critical tool in the design and analysis of piezoelectric devices, offering detailed numerical simulations that guide various applications. While traditionally applied to eigenfrequency analysis and…
Optical beam deflection is a popular method to measure the deformation of micromechanical devices. As it measures mostly a local slope, its sensitivity depends on the location and size of the optical spot. We present a method to evaluate…
This work presents a modeling framework to represent the thermomechanical behavior of complex materials based on micromechanical dynamics. The framework is applied to nuclear fuel rod elements composed of Zircaloy-2 cladding tubes and…
A coarse-grained molecular dynamics model of linear polyethylene-like polymer chain system was built to investigate the responds of structure and mechanical properties during uniaxial deformation. The influence of chain length, temperature,…
Detector-plane prototypes of the very forward calorimetry of a future detector at an e+e- collider have been built and their performance was measured in an electron beam. The detector plane comprises silicon or GaAs pad sensors, dedicated…
This Paper deals design and simulation of electrostatically actuated clamped clamped beam and cantilever beam using finite element analysis method (FEM). A detailed study and performance analysis for various bias voltages is provided in…
Inflated-beam soft robots, such as tip-everting vine robots, can control curvature by contracting one beam side via pneumatic actuation. This work develops a general finite element modeling approach to characterize their bending. The model…
Nanoscale multi-phase microstructures observed in multi-principal element alloys (MPEAs) such as $\rm AlMo_{0.5}NbTa_{0.5}TiZr$, $\rm Al_{0.5}NbTa_{0.8}Ti_{1.5}V_{0.2}Zr$, $\rm TiZrNbTa$, $\rm AlCoCrFeNi$ and $\rm…
We have achieved stimulated laser cooling of thermal rubidium atomic beams on a silicon chip. Following pre-collimation via a silicon microchannel array, we perform beam brightening via a blue-detuned optical molasses. Owing to the small…
Difference dilatometry and differential scanning calorimetry (DSC) are used to investigate defect annealing in ultrafine grained nickel processed by equal channel angular pressing (ECAP) at various temperatures. Different defect types and…
A novel photonic thermal diode concept operating in the near field and capitalizing on the temperature-dependence of coupled surface polariton modes in nanostructures is proposed. The diode concept utilizes terminals made of the same…
The elasticity of PDMS has played a central role in advancing important microfluidic technologies, ranging from early valves to sophisticated organ-on-a-chip systems. However, most deformable microfluidic devices are based on geometries…
We use a frequency-dependent electro-optic technique to measure the hole mobility in small molecule organic semiconductors, such as 6,13 bis(triisopropylsilylethynyl)-pentacene. Measurements are made on semiconductor films in bottom gate,…
Planar electromagnetic actuators based on the principle of linear motors are widely employed for micro and nano positioning applications. These actuators usually employ a planar magnetic platform driven by a co-planar electromagnetic coil.…
Powerful mid-infrared illumination combined with mechanical detection via force microscopy provides access to nanoscale spectroscopic imaging in Materials and Life Sciences. Photo-induced force microscopy (PiFM) employs pulsed illumination…
Despite the growing level of technological advancement that characterizes extrusion-deposition additive manufacturing technology, there remains a significant knowledge gap in fully understanding the process-structure-property relationship…
This data set descriptor introduces a structured, high-resolution dataset of transient thermal simulations for a vertical axis of a machine tool test rig. The data set includes temperature and heat flux values recorded at 29 probe locations…
Phase-segregated polyureas (PU) have received considerable interest due to their use as tough, impact-resistant coatings. Polyureas are favored for these applications due to their mechanical strain rate sensitivity and energy dissipation.…