Related papers: Au-SN Flip-Chip Solder Bump for Microelectronic an…
Advancements in miniaturisation and new capabilities of implantable devices impose a need for the development of compact, hermetic, and CMOS-compatible micro packaging methods. Gold-tin-based eutectic bonding presents the potential for…
The electronic structure of Au-Sn intermetallic layers of different compositions grown on Au(111) to the thickness of several nanometers has been studied in this work. The layer, interface and the substrate related components in the Au 4$f$…
Real time electron microscopy observation on morphological changes in gold nano structures deposited on Si (100) surfaces as a function of annealing temperatures has been reported. Two types of interfaces with the substrate silicon were…
Plasmonic Au-Pt core-shell heterojunctions were prepared as nanoemitters at pre-structured porous SiO2/Si interfaces. Silicon templates were obtained by oscillatory photocurrent cycles in fluoride containing solutions. Local formation of…
Superconducting flip-chip interconnects are crucial for the three-dimensional integration of superconducting circuits in sensing and quantum technology applications. We demonstrate a simplified approach for a superconducting flip-chip…
We report the studies of ultrafast electron nanocrystallography on size-selected Au nanoparticles (2-20 nm) supported on a molecular interface. Reversible surface melting, melting, and recrystallization were investigated with dynamical…
Recent progress in hybrid nanomaterials composed of dissimilar constituents permitted to improve performance and functionality of novel devices developed for optoelectronics, catalysis, medical diagnostic and sensing. However, the rational…
For many years, Si1-yGey alloys have been applied in the semiconductor industry due to the ability to adjust the performance of Si-based nanoelectronic devices. Following this alloying approach of group-IV semiconductors, adding tin (Sn)…
SnBiInZn based high entropy alloy (HEA) was studied as a low reflow temperature solder with melting point around 80 oC. The wetting angle is about 52o after reflow at 100 oC for 10 min. The interfacial intermetallic compound (IMC) growth…
Silicon nanocrystals are produced using a two-stage gold ion implantation technique. First stage implantation using low energy ions leads to the formation of an amorphous Si (a-Si) layer. A subsequent high energy Au irradiation in the…
In the present study, superheating treatment has been applied on A357 reinforced with 0.5 wt. % (Composite 1) and 1.0 wt.% (Composite 2) continuous stainless steel composite. In Composite 1 the microstructure displayed poor bonding between…
We have developed a novel fabrication process for ultra-small, full-epitaxial NbN Josephson junctions on a silicon (Si) substrate. A full-epitaxial NbN/AlN/NbN tri-layer was grown on a Si (100) wafer with a (200)-oriented TiN buffer layer.…
Sensing lower molecular weight in a diluted solution using a label-free biosensor is challenging and requires a miniaturized plasmonic structure, e.g., a vertical Au nanorod (AuNR) array based metamaterials. The sensitivity of a sensor…
For a successful integration of silicon in high-capacity anodes of Li-ion batteries, its intrinsic capacity decay on cycling due to severe volume swelling should be minimized. In this work, Ni-Sn intermetallics are studied as buffering…
We have investigated spin accumulation in Ni/Au/Ni single-electron transistors assembled by atomic force microscopy. The fabrication technique is unique in that unconventional hybrid devices can be realized with unprecedented control,…
Additive manufacturing can realize almost any designed geometry, enabling the fabrication of innovative products for advanced applications. Local electrochemical plating is a powerful approach for additive manufacturing of metal…
This paper describes the development of metallic bipolar plate fabrication using micro-electroforming process for mini-DMFC (direct methanol fuel cell) stacks. Ultraviolet (UV) lithography was used to define micro-fluidic channels using a…
Chip-integrated optical frequency combs (OFCs) based on Kerr nonlinear resonators are of great significance given their scalability and wide range of applications. Broadband on-chip OFCs reaching visible wavelengths are especially valuable…
High-index surfaces of silicon with adsorbed gold can reconstruct to form highly ordered linear step arrays. These steps take the form of a narrow strip of graphitic silicon. In some cases - specifically, for Si(553)-Au and Si(557)-Au - a…
The electronic properties of the two-dimensional (2D) $\alpha$ phase of antimonene are unique, featuring unpinned Dirac cones that can be moved with strain. Here we investigate the structural and electronic properties of an epitaxial 2D…