Instrumentation and Detectors
Fabrication of dielectrics at low temperature is required for temperature-sensitive detectors. For superconducting detectors, such as transition edge sensors and kinetic inductance detectors, AlMn is widely studied due to its variable…
The cosmogenic production of long-lived isotopes such as $^{3}$H,$^{55}$Fe, $^{60}$Co, $^{65}$Zn, and $^{68}$Ge poses a significant challenge as a source of background events in Ge-based dark matter (DM) and neutrinoless double-beta decay…
The RD50-MPW4 is the latest HV-CMOS pixel sensor from the CERN-RD50-CMOS working group, designed to evaluate the HV-CMOS technology in terms of spatial resolution, radiation hardness and timing performance. Fabricated by LFoundry using a…
We report on the first observation of electroluminescence amplification with a Microstrip Plate immersed in liquid xenon. The electroluminescence of the liquid, induced by alpha-particles, was observed in an intense non-uniform electric…
Dual-phase liquid-xenon time projection chambers (LXe TPCs) deploying a few tonnes of liquid are presently leading the search for WIMP dark matter. Scaling these detectors to 10-fold larger fiducial masses, while improving their sensitivity…
Homodyne Quadrature Interferometers (HoQIs) are compact, low noise and high dynamic range displacement sensors designed for use in gravitational wave observatories. Their lower noise compared to the displacement sensors used at present…
The increasing popularity of time-resolved X-ray absorption measurements for understanding dynamics in molecular and material systems has led to many advances in table-top sources for pulsed X-rays. We report on a table top laser-produced…
The determination of the fraction of energy deposited in the coolant is required for the setup of accurate thermal-hydraulic calculations in reactor core analysis. This study focuses on assessing this fraction and analysing the neutronic…
The three natural decay chains have short-lived daughter elements, and the existence of these radioelements makes it possible for alpha and beta particle emissions to be generated at the same place and the same time. We show theoretically…
We present a monoenergetic positron beam specifically tailored to the needs of (near-) surface positron annihilation spectroscopy. The Setup for LOw-energy Positron Experiments (SLOPE) comprises a high-activity 22Na source, a tungsten…
Scintillations of radio frequency signals due to the ionosphere, despite having been studied for decades, is still an active area of research. Of particular interest is the scintillations near the geomagnetic equator, where such…
The ALICE ITS3 project foresees the use of ultra-light MAPS, developed in the 65 nm imaging process, for the vertex detector in the ALICE experiment at the LHC to drastically improve the vertexing performance. This new development,…
After the successful installation and first operation of the new Inner Tracking System (ITS2), which consists of about 10 m$^2$ of monolithic silicon pixel sensors, ALICE is pioneering the usage of bent, wafer-scale pixel sensors for the…
The CERN RD50 collaboration develops depleted monolithic active pixel CMOS sensors for future colliders with the aim of high radiation tolerance, good time resolution, and high granularity pixel detectors. The most recent prototype, the…
The advent of back-illuminated complementary metal-oxide-semiconductor (CMOS) sensors and their well-known advantages over charge-coupled devices (CCDs) make them an attractive technology for future X-ray missions. However, numerous…
We describe the development, operation, and application of the 4D Camera -- a 576 by 576 pixel active pixel sensor for scanning/transmission electron microscopy which operates at 87,000 Hz. The detector generates data at approximately 480…
In this work we demonstrate that ultra-thin (5 and 15 nm) MgO transmission dynodes (tynodes) with sufficient high transmission electron yield (TEY) can be constructed. These tynodes act as electron amplification stages in a novel vacuum…
Scanning transmission electron microscopy is a common tool used to study the atomic structure of materials. It is an inherently multimodal tool allowing for the simultaneous acquisition of multiple information channels. Despite its…
Large-area transmission dynodes were fabricated by depositing an ultra-thin continuous film on a silicon wafer with a 3-dimensional pattern. After removing the silicon, a corrugated membrane with enhanced mechanical properties was formed.…
Thompson-Lampard type calculable capacitors (TLCC) serve as electrical capacitance standards, enabling the realization of the farad in the International System of Units (SI) with a combined uncertainty on the order of one part in $10^8$.…