Related papers: Microbubbly drag reduction in Taylor-Couette flow …
We provide experimental measurements for the effective scaling of the Taylor-Reynolds number within the bulk $\text{Re}_{\lambda,\text{bulk}}$, based on local flow quantities as a function of the driving strength (expressed as the Taylor…
The hydrodynamics of bubble columns in the heterogeneous regime is revisited. Focusing on air-water systems at large aspect ratio, we show from dimensional analysis that buoyancy equilibrates inertia, and that velocities scale as…
In particle-laden turbulent flows the turbulence in carrier fluid phase gets affected by the dispersed particle phase for volume fraction above $10^{-4}$ and hence reverse coupling or two-way coupling becomes relevant in that volume…
We numerically investigate Taylor-Couette flow in a wide-gap configuration, with $r_i/r_o=1/2$, the inner cylinder rotating, and the outer cylinder stationary. The fluid is taken to be electrically conducting, and a magnetic field of the…
Injection of dilute polymer in a turbulent flow suppresses frictional drag. This challenging and technologically important problem remains primarily unresolved due to the complex nature of the flow. An important factor in the drag reduction…
We present angular momentum transport (torque) measurements in two recent experimental studies of the turbulent flow between independently rotating cylinders. In addition to these studies, we reanalyze prior torque measurements to expand…
Long-chained, viscoelastic surfactant solutions (VES) have been widely employed in the oil and gas industry, particularly in hydraulic fracturing and gravel-packing operations, where turbulence is commonly reached due to high pumping rates.…
A model for the pseudo-turbulent Reynolds stress tensor in compressible flows through monodisperse particle clouds is developed based on data from particle resolved numerical simulations. This model extends previous models for the…
We study suspensions of oblate rigid particles in a viscous fluid for different values of the particle volume fractions. Direct numerical simulations have been performed using a direct-forcing immersed boundary method to account for the…
Air cavities, i.e. air layers developed behind cavitators, are seen as a promising drag reducing method in the maritime industry. Here we utilize the Taylor-Couette (TC) geometry, i.e. the flow between two concentric, independently rotating…
A series of direct numerical simulations of Taylor-Couette (TC) flow, the flow between two coaxial cylinders, with the outer cylinder rotating and the inner one fixed, were performed. Three cases, with outer cylinder Reynolds numbers $Re_o$…
Turbulence modulation by inertial-range-size, neutrally-buoyant particles is investigated experimentally in a von K\'arm\'an flow. Increasing the particle volume fraction $\Phi_\mathrm{v}$, maintaining constant impellers Reynolds number…
We investigate the mechanisms by which inertial solid particles modulate turbulence and alter the fluid mass transport in dense turbulent liquid-solid flows. To this end, we perform Euler-Lagrange simulations at friction Reynolds number…
Polymer additives are commonly utilized to manipulate bubbly flows in various applications. Here, we investigate the effects of clean and contaminated bubbles driven upwards (upflow) in Newtonian and viscoelastic turbulent channel flows.…
The relation between rotating plane Couette and Taylor-Couette flows is clarified. The identity of their linear stability limits is explained by considering the effect of the Coriolis force in the rotating frame. Experimental data are used…
Investigations of counter-rotating Taylor-Couette flow (TCF) in the narrow gap limit are conducted in a very large aspect ratio apparatus. The phase diagram is presented and compared to that obtained by Andereck et al. The spiral turbulence…
The drag reduction induced by superhydrophobic surfaces is investigated in turbulent pipe flow. Wetted superhydrophobic surfaces are shown to trap gas bubbles in their asperities. This stops the liquid from coming in direct contact with the…
What is the turbulent drag force experienced by an object moving in a rotating fluid? This open and fundamental question can be addressed by measuring the torque needed to drive an impeller at constant angular velocity $\omega$ in a water…
We investigate magnetic Taylor--Couette flow in the presence of an imposed axial magnetic field. First we calculate nonlinear steady axisymmetric solutions and determine how their strength depends on the applied magnetic field. Then we…
We study the decay of high-Reynolds number Taylor-Couette turbulence, i.e. the turbulent flow between two coaxial rotating cylinders. To do so, the rotation of the inner cylinder (Re$_i=2 \times 10^6$, the outer cylinder is at rest) is…