Related papers: Temperature Effects on Mechanical Properties of Zi…
Previous studies have shown that the elastic properties of Zinc Dialkyl-dithiophosphate (ZDTP) tribofilms measured by nanoindentation increase versus applied pressure (Anvil effect) [1, 2]. The aim of this paper is to demonstrate that, up…
The layered structure and the rheological properties of anti-wear films, generated in a rolling/sliding contact from lubricants containing zinc dialkyldithiophosphate (ZDTP) and/or molybdenum dialkyldithiocarbamate (MoDTC) additives, have…
Ta (100 nm) / NdFeB (5 $\mu$m) / Ta (100 nm) films have been deposited onto Si substrates using triode sputtering (deposition rate ~ 18 $\mu$m/h). A 2-step procedure was used : deposition at temperatures up to 400 C followed by ex-situ…
Zinc dialkyldithiophosphate (ZDDP), as the most prominent lubrication additive, forms tribofilms consisting primarily of zinc phosphate glasses containing sulfides. As sulfur is linked to environmental concerns, sulfur-free zinc phosphate…
Al-doped ZnO thin films were deposited using reactive high power impulse magnetron sputtering at substrate temperatures between room temperature and 600 $\bullet$ C. Two sample series with different oxygen partial pressures were studied.…
Zinc dialkyldithiophosphates (ZDDPs) have been commonly used as anti-wear additives in the automotive industry for the past 80 years. The morphology, composition and structure of the ZDDPs phosphate-based tribofilm, which is essential for…
In this paper we show how reliable measurements on porous ceramic films can be made by appropriate nanoindentation experiments and analysis. Room-temperature mechanical properties of the mixed-conducting perovskite material LSCF6428 were…
Copper oxide thin films are deposited on quartz substrates by DC magnetron sputtering and the effect of deposition temperature on their optoelectronic properties is examined in detail. Scanning Electron Microscopy (SEM), X-ray diffraction…
Refractory metals that can withstand at high temperatures and harsh conditions are of utmost importance for solar-thermal and energy storage applications. Thin films of TiN have been deposited using cathodic vacuum arc deposition (CVA) at…
Modeling deformation at elevated temperatures using discrete dislocation dynamics (DDD) is a recent area of high interest. However, the literature dedicated to this subject fails to address the variations of DDD parameters with temperature.…
Diamond-Like Carbon (DLC) films have been shown to demonstrate various tribological behaviors: in ultra-high vacuum (UHV), with either friction coefficients as low as 0.01 or less and very mild wear, or very high friction coefficients…
The mechanical properties of azobenzene-containing polymer films are statistically measured by instrumented nanoindentation experiment in the dark and under illumination in the absorption band of the azobenzene molecules, with special…
Further development of nuclear power plant technology relies heavily on materials durability under operating conditions. Estimating the materials performance in the operando tests is crucial. In this paper, the mechanical behavior of thin…
The mechanical behavior of nanotwinned Cu was studied through indentation creep and constant strain rate indentation tests from 25 $^\circ$C to 200 $^\circ$C. The results showed an enhanced strain rate sensitivity of nanotwinned Cu with…
The copper ferrite thin films have been deposited by RF sputtering at a 50W rf power. The As-deposited films are annealed in air at $800^{\circ}$C and then slow cooled. The As-deposited (AD) as well as slow cooled (SC) films are studied…
The dielectric properties of NiO thin films grown by pulsed laser deposition have been studied as a function of strain at temperature from 10 to 300 K. Above 150 K, the contribution of space-charge polarization to the dielectric…
Varying the substrate temperature changes structural and magnetic properties of spinel ferrite NZFO thin films. XRD of films grown at different temperature display only 004 reflections, without any secondary peaks, showing growth…
The effect of substrate was studied using nanoindentation on thin films. Soft films on hard substrate showed more pile up than usual which was attributed to the dislocation pile up at the film substrate interface. The effect of tip blunting…
5$\mu$m thick SmCo films were deposited onto Si substrates using triode sputtering. A study of the influence of deposition temperature (Tdep <= 600 degrees C) on the structural, magnetic and mechanical properties has shown that optimum…
The temperature dependence of optical constants of titanium nitride thin film is investigated using spectroscopic ellipsometry between 1.4 to 5 eV in the temperature range 300 K to 650 K in steps of 50 K. The real and imaginary parts of the…