Related papers: Opto-fluidic third order distributed feed-back dye…
The authors report on a room-temperature nanoimprinted, DNA-based distributed feedback (DFB) laser operating at 605 nm. The laser is made of a pure DNA host matrix doped with gain dyes. At high excitation densities, the emission of the…
We present a laterally emitting, coupled cavity micro fluidic dye ring laser, suitable for integration into lab-on-a-chip micro systems. The micro-fluidic laser has been successfully designed, fabricated, characterized and modelled. The…
Lab-on-a-Chip (LoC) devices combining microfluidic analyte provision with integrated optical analysis are highly desirable for several applications in biological oder medical sciences. While the microfluidic approach is already broadly…
techniques can be considered as an attractive alternative to the often-cumbersome traditional manufacturing routes. With the use of high-power lasers, localized hot zones that are necessary for glass making can be obtained rapidly. For…
Polymer micro- and nano-fibers, made of organic light-emitting materials with optical gain, show interesting lasing properties. Fibers with diameters from few tens of nm to few microns can be fabricated by electrospinning, a method based on…
We have investigated the bleaching dynamics that occur in optofluidic dye lasers where the liquid laser dye in a microfluidic channel is locally bleached due to optical pumping. We find that for microfluidic devices, the dye bleaching may…
We present the first demonstration of a 1550 nm multi-wavelength distributed feedback (MW-DFB) laser employing a third-order, four-phase-shifted sampled sidewall grating. By utilizing linearly chirped sampled gratings and incorporating…
Although nanolasers typically have low Q-factors and high lasing thresholds, they have been successfully implemented with various gain media. Intuitively, it seems that an increase in the gain coefficient would improve the characteristics…
Microfluidic mixing is a fundamental functionality in most lab on a chip (LOC) systems,whereas realization of efficient mixing is challenging in microfluidic channels due to the small Reynolds numbers. Here, we design and fabricate a…
Large-scale microfluidic microsystems with complex three-dimensional (3D) configurations are highly in demand by both fundamental research and industrial application, holding the potentials for fostering a wide range of innovative…
We demonstrate thermal-noise-limited direct locking of a semiconductor distributed feedback (DFB) laser to a sub-1 mL volume, ultrastable optical cavity, enabling extremely compact and simple ultrastable laser systems. Using the…
We have demonstrated the fabrication and characterization of 2D liquid-based multimode optical waveguide structures over a Polydimethylsiloxane (PDMS) material-based chip. Fabrication of two separate microstructures, one with a width of 14…
Distributed feedback (DFB) dye lasing by polarization modulation is studied theoretically on the basis of modified rate equations. Numerical solution of these equations allows to obtain the generated power dynamics and the dependence of…
The combination of grating-based frequency-selective optical feedback mechanisms, such as distributed feedback (DFB) or distributed Bragg reflector (DBR) structures, with quantum dot (QD) gain materials is a main approach towards…
This study proposes and experimentally demonstrates a distributed feedback (DFB) laser with a distributed phase shift (DPS) region at the center of the DFB cavity. By modeling the field intensity distribution in the cavity and the output…
Quasi-bound states in the continuum (q-BICs) enable low-threshold lasing through high-Q cavity modes, yet their polarization tunability remains constrained by nanostructure-imposed cavity symmetries. By engineering a microcavity with an…
In this work, we introduce a non-volatile heterogeneous quantum dot (QD) III-V/Al2O3/Si distributed feedback (DFB) laser exhibiting optical memristive behavior. The device operates in the O-band (~1300 nm) with a threshold current density…
Optofluidic devices have revolutionized the manipulation and transportation of fluid at smaller length scales ranging from micrometers to millimeters. We describe a dedicated optical setup for studying laser-induced cavitation inside a…
Laser writing of materials is normally performed by the sequential scanning of a single focused beam across a sample. This process is time-consuming and it can severely limit the throughput of laser systems in key applications such as…
Plasmonic lasers (spasers) generate coherent surface-plasmon-polaritons (SPPs) and could be realized at subwavelength dimensions in metallic cavities for applications in nanoscale optics. Plasmonic cavities are also utilized for terahertz…