Related papers: Cavity Q, mode volume, and lasing threshold in sma…
We consider a recently reported micro-fluidic dye ring laser and study the full wave nature of TE modes in the cavity by means of finite-element simulations. The resonance wave-patterns of the cavity modes support a ray-tracing view and we…
We demonstrate experimentally an air-slot mode-gap photonic crystal cavity with quality factor of 15,000 and modal volume of 0.02 cubic wavelengths, based on the design of an air-slot in a width-modulated line-defect in a photonic crystal…
In this paper, we have studied the strain, bandedge, and energy levels of cubic InGaAs quantum dots (QDs) surrounded by GaAs. It is shown that overall strain value is larger in InGaAs-GaAs interfaces, and also in smaller QDs. Also, it is…
Surface acoustic waves (SAWs) coupled to quantum dots (QDs), trapped atoms and ions, and point defects have been proposed as quantum transduction platforms, yet the requisite coupling rates and cavity lifetimes have not been experimentally…
Low threshold lasers realized within compact, high quality optical cavities enable a variety of nanophotonics applications. Gallium nitride (GaN) materials containing indium gallium nitride (InGaN) quantum dots and quantum wells offer an…
We report on fabrication of on-chip calcium fluoride (CaF2) microdisk resonators using water-assisted femtosecond laser micromachining. Focused ion beam (FIB) milling is used to create ultra-smooth sidewalls. The quality (Q)-factors of the…
We theoretically demonstrate high Quality factor micropillar cavities with record low mode volumes based on the TiO2/SiO2 material system. The proposed cavities have Q/V three orders of magnitude larger than previously reported ones. We…
A two-dimensional photonic crystal microcavity design supporting a wavelength-scale volume resonant mode with a calculated quality factor (Q) insensitive to deviations in the cavity geometry at the level of Q~2x10^4 is presented. The…
We present single-mode nanowire (NW) lasers with ultralow threshold in the near-infrared spectral range. To ensure the single-mode operation, the NW diameter and length are reduced specifically to minimize the longitudinal and transverse…
The influence of indium percentage on dynamical characteristics of InxGa1-xAs/GaAs(001) quantum dot lasers (QDLs) is investigated. Energy levels of self-organized truncated-cone-shape QDs are calculated by means of the eight-band k.p model,…
The manufacturing cost of quantum cascade lasers is still a major bottleneck for the adoption of this technology for chemical sensing. The integration of Mid-Infrared sources on Si substrate based on CMOS technology paves the way for…
We demonstrate gallium phosphide (GaP) microdisk optical cavities with intrinsic quality factors $ > 2.8\times10^{5}$ and mode volumes $< 10 (\lambda/n)^3$, and study their nonlinear and optomechanical properties. For optical intensities up…
We describe the optical emission and the carrier dynamics of an ensemble of self-assembled GaAs quantum dots embedded in GaP(001). The QD formation is driven by the 3.6 % lattice mismatch between GaAs and GaP in Stranski-Krastanow mode…
High-quality micropillar cavities were grown using molecular-beam epitaxy. Stable continuous-wave lasing at room-temperature was demonstrated for microlasers with semiconductor and hybrid output mirrors. At 300 K, single-mode lasing was…
We present a compact InGaN fiber Bragg grating (FBG) semiconductor laser diode operating below 400 nm in the single-mode emission regime. This compact coherent laser source exhibits an intrinsic linewidth of 14 kHz in the near-UV range and…
We present a comprehensive study of internal quality factors in superconducting stub-geometry 3-dimensional cavities made of aluminum. We use wet etching, annealing and electrochemichal polishing to improve the as machined quality factor.…
We present a simple fabrication method for the realization of suspended GaAs nanomembranes for cavity quantum optomechanics experiments. GaAs nanomembranes with an area of 1.36 mm by 1.91 mm and a thickness of 160 nm are obtained by using a…
A comprehensive numerical modelling of microcavity parameters for micropillar lasers with optical pumping was presented. The structure with a hybrid dielectric-semiconductor top mirror has a significantly higher calculated quality-factor…
We experimentally demonstrated high quality factors (Q-factors) of nanocavities in three-dimensional photonic crystals by increasing the in-plane area of the structure. Entire structures made of GaAs were fabricated by a micro-manipulation…
A system for studying microcavity resonators at cryogenic temperatures (~10 K) through evanescent coupling via optical fiber taper waveguides is reported, and efficient fiber coupling to AlGaAs microdisk cavities with embedded quantum dots…