Related papers: Investigation of Flow Inside an Axial-Flow Pump of…
Reversible pump turbines are praised for their operational flexibility leading to their recent wide adoption within pumped storage hydropower plants. However, frequently imposed off-design operating conditions in these plants give rise to…
The fundamental action of the bubble-driven inertial micropump is investigated. The pump has no moving parts and consists of a thermal resistor placed asymmetrically within a straight channel connecting two reservoirs. Using numerical…
The evaluation of fluid forces on the stem is important for wear prediction of valve and actuator guidance parts. While estimating the axial load is straight forward, estimating and/or measuring the side load is more difficult, especially…
The flow profile in a capillary gap and the pumping efficiency of an acoustic micropump employing Surface Acoustic Waves is investigated both experimentally and theoretically. Such ultrasonic surface waves on a piezoelectric substrate…
Turbofan engine performance depends highly on the characteristics and conditions of the inlet flow. Swirl distortions, caused by non-uniformities in flows arising from boundary layer or ground/fuselage vortex ingestion are of concern and…
We present the results of an experimental and numerical investigation of a turbulent flow over a backward-facing step in a channel. Experimental data are visualized using a Particle Image Velocimetry (PIV) device. As a mathematical model we…
In this article we present an analytical method for deriving the relationship between the pressure drop and flow rate in laminar flow regimes, and apply it to the flow of power-law fluids through axially-symmetric corrugated tubes. The…
Inertial pumping is a promising new method of moving fluids through microchannels but many of its properties remain unexplored. In this work, inertial flow rates are investigated for different channel lengths, operating temperatures, and…
Fluid flow and convective heat transfer in rotor-stator configurations, which are of great importance in different engineering applications, are treated in details in this review. The review focuses on convective heat transfer in…
A two-dimensional computational fluid dynamics model is used to predict the oscillatory flow through a tapered cylindrical tube section (jet pump) placed in a larger outer tube. Due to the shape of the jet pump, there will exist an…
Direct dry-cooled power plants typically operate numerous large-diameter axial flow fans in air-cooled condensers to facilitate the condensation of steam in the plant thermodynamic cycle. Enhanced fan efficiency may, at scale, lead to…
Three intra-aortic blood pumps were evaluated and compared using CFD simulations. The aim of this study is to evaluate the hemodynamic performance and calculate the hemolytic potential of the pumps. The flow fields generated by the pumps…
This study outlines a model for injected fluid flow in a vertically confined porous aquifer with mechanical dispersion. Existing studies have investigated the behaviour and geometry of immiscible fluid flow in this setting, where the…
A pinned-free beam in axial fluid flow, subjected to feedback-based actuation at the pinned end, is investigated. The actuation may be a moment or a prescribed angle and it is proportional to the state (curvature, slope, or displacement) of…
This study is concerned with the statistics of vertical turbulent channel flow laden with inertial particles for two different volume concentrations ($\Phi_{V} = 3 \times 10^{-6}$ and $\Phi_{V} = 5 \times 10^{-5}$) at a Stokes number of…
Hydropower is an important source of renewable energy that provides clean energy. Pump-turbine type hydraulic turbine is widely used to mitigate the intermittent energy demand and store a large-scale energy. Pump-turbine operates in reverse…
The intermittent compact flow of glass beads in a vertical glass pipe of small diameter is studied experimentally by combining particle fraction, pressure, and air and grain flow rates measurements with a spatio-temporal analysis of the…
Axial flow in an annulus between two concentric cylinders is commonly seen in various flow devices used in chemical processing industries and petroleum science and engineering. The flow state in the annulus strongly influences the…
Valveless pumping assists in fluid transport in various organisms and engineering systems. In a previous work, to study the actuator impact effects on valveless pumping, we constructed a piecewise-linear lumped-parameter model for a…
A blood turbine-pump system (iATVA), resembling a turbocharger was proposed as a mechanical right-heart assist device without external drive power. In this study, the iATVA system is investigated with particular emphasis on the blood…