Related papers: The Data Acquisition System Based on PMC Bus
Data logging at an upgraded KEKB accelerator or the J-PARC facility, currently under commission, requires a high density data acquisition platform with integrated data reduction CPUs. To follow market trends, we have developed a DAQ…
A data acquisition (DAQ) system has been developed which will read out and control calorimeters serving as prototype systems for a future detector at an electron-positron linear collider. This is a modular, flexible and scalable DAQ system…
This paper discusses the present data acquisition system (DAQ) of the COMPASS experiment at CERN and presents development of a new DAQ. The new DAQ must preserve present data format and be able to communicate with FPGA cards. Parts of the…
This paper presents the design and implementation of the front-end electronics and the data acquisition (DAQ) system for readout of multi-wire drift chambers (MWDC). Apart of the conventional drift time measurement the system delivers the…
New front-end electronics including ASICs and FPGA boards are under development for the ATLAS Monitored Drift Tube (MDT) detector to handle the large data rates and harsh environment expected at high-luminosity LHC runs. A mobile Data…
In high energy physics experiments (HEP), high speed and fault resilient data communication is needed between detectors/sensors and the host PC. Transient faults can occur in the communication hardware due to various external effects like…
We have built a high precision (24-bit) data acquisition (DAQ) system with eight simultaneously sampling input channels for the measurement of the electric dipole moment (EDM) of the electron. The DAQ system consists of two main components,…
Meta-software for data acquisition (DAQ) is a new approach to design the DAQ systems for experimental setups in experiments in high energy physics (HEP). It abstracts from experiment-specific data processing logic, but reflects it through…
A new data acquisition program for personal computers with Windows operating system has been built at Charles University van de Graaff laboratory. It allows fast data acquisition from CAMAC and other PC interface cards using interrupt or…
Although CMS will not start operation for several years, many subdetector groups have active testbeam programs involving final or near-final electronics. The high-bandwidth electronics require the development of new DAQ systems including…
The multi-host type DAQ front-end system is proposed and a prototype system is developed. In general, CAMAC/VME type ADC modules have a single trigger-input (or gate-input) port. In contrast, a prototype of a new system has multiple…
Exponential increases in scientific experimental data are outstripping the rate of progress in silicon technology. As a result, heterogeneous combinations of architectures and process or device technologies are increasingly important to…
Modern DAQ systems typically use the FPGA-based PCIe cards to concentrate and deliver the data to a computer used as an entry node of the data processing network. This paper presents a QEMU-based methodology for the co-development of the…
At MAX IV pixelated area detectors are operated at high frame rates to take advantage of the X-ray beam properties available from the fourth generation synchrotron in scattering, diffraction and imaging applications. A variety of photon…
In this paper, we design a PXI-based, multi-channel data-acquisition system (DAS) mainly applicable to recording one-shot fast transient pulses in nuclear physics experiments. The system consists of one NI PXIe-1085 chassis, containing a…
To standardize and simplify the control system at Korea Superconducting Tokamak Advanced Research (KSTAR), we develop 10G Ethernet based remote DAQ system. By separating the DAQ system and the host, the structure of the control system can…
We present the design and first test results of a new FADC-based data acquisition (DAQ) system for the Grande array of the KASCADE-Grande experiment. The original KASCADE experiment at the Forschungszentrum Karlsruhe, Germany, has been…
The time-of-flight (TOF) system in the Compressed Baryonic Matter (CBM) experiment is composed of super modules based on multi-gap Resistive Plate Chambers (MRPC) for high-denseness, high-resolution time measurement. In order to evaluate…
As the development of electronic science and technology, electronic data acquisition (DAQ) system is more and more widely applied to nuclear physics experiments. Workstations are often utilized for data storage, data display, data…
The Real-Time Systems Engineering Department of the Scientific Computing Division at Fermilab is developing a flexible, scalable, and powerful data-acquisition (DAQ) toolkit which serves the needs of experiments from bench-top hardware…