Related papers: Pt-based metallization of PMOS devices for the fab…
We have studied the structural and superconducting properties of MgB$_2$ thin films made by pulsed laser deposition followed by in situ annealing. The cross-sectional transmission electron microscopy reveals a nanocrystalline mixture of…
A second monolithic silicon pixel prototype was produced for the MONOLITH project. The ASIC contains a matrix of hexagonal pixels with 100 {\mu}m pitch, readout by a low-noise and very fast SiGe HBT frontend electronics. Wafers with 50…
Manganite thin films are promising candidates for studying the strongly correlated electron systems. Understanding the growth-and morphology-driven changes in the physical properties of manganite thin films is vital for their applications…
Highly oriented polycrystalline SSMO thin films deposited on single crystal substrates by ultrasonic nebulized spray pyrolysis have been studied. The film on LAO is under compressive strain while LSAT and STO are under tensile strain. The…
Optomechanical resonators were fabricated on a silicon-on-insulator (SOI) substrate that had been implanted with phosphorus donors. The resonators' mechanical and optical properties were then measured (at 6 kelvin and room temperature)…
Pt-Al and Pt-Y-Al thin film electrodes on yttria-stabilised zirconia electrolytes were prepared by dealloying of co-sputtered Pt-Al or Pt-Y-Al films. The selective dissolution of Al from the Pt-alloy compound causes the formation of a…
Platinum diselenide (PtSe${_2}$) is a two-dimensional (2D) material with outstanding electronic and piezoresistive properties. The material can be grown at low temperatures in a scalable manner which makes it extremely appealing for many…
Coral Pt islands films are deposited via electrochemical reduction on silica coated nanostructured Ag electrodes. From these devices surface enhanced (resonance) Raman [SE(R)R] signals of molecules exclusively attached to Pt are obtained…
The oxygenation process at constant temperature of YBa$_2$Cu$_3$O$_{7-\delta}$ (YBCO) was systematically investigated in the temperature range from 300 $^o$C to 800 $^o$C. With this purpose, fully deoxygenated powder samples was exposed to…
Highly smooth and c-axis oriented superconducting MgB2 thin films were prepared by pulsed laser deposition (PLD) with off-axis geometry. The films were deposited on Al2O3-C substrates perpendicularly aligned to a stoichiometric MgB2 target…
In the present work we study the growth by pulsed laser deposition of YBa$_2$Cu$_3$O$_{7-\delta}$ (YBCO) films on the r-cut sapphire substrates. To improve the matching of the lattice parameters between the substrate and the film we use…
Materials with strong spin orbit coupling (SOC) are essential for realizing spin orbit torque (SOT) based magnetic memory devices. Transition metal dichalcogenides (TMDs) are promising candidates for such appli cations because of their…
Resistive switching (RS) effect observed in capacitor-like metal/insulator/metal junctions belongs to the most promising candidates for next generation of memory cell technology. It is based upon a sudden change of the junction resistance…
We have investigated the atomically-resolved substrate and homoepitaxial thin film surfaces of SrTiO3(001) using low-temperature scanning tunneling microscopy/spectroscopy (STM/STS) combined with pulsed laser deposition (PLD). It was found…
The effect of annealing on the dynamical behavior of swelling for ultrathin polyacrylamide films deposited on silicon substrates have been studied using X-ray reflectivity technique. The spin coated polyacrylamide films of similar…
Silicon thin films for coverages ($\theta$) between 0.3 and 3 monolayers have been grown on rutile \ce{TiO2}(110)-(1x1) at room temperature and studied by x-ray and ultra-violet photoelectron spectroscopies, Auger electron spectroscopy, and…
We investigate the temperature dependence of the resistivity and magnetoresistance of a polycrystalline $Sr_2CoMoO_{6-\delta}$ film deposited on (100)-$SrTiO_3$ substrate prepared by the pulsed laser deposition method. X-ray diffraction,…
Formation of low-resistance metal contacts is the biggest challenge that masks the intrinsic exceptional electronic properties of 2D WSe2 devices. We present the first comparative study of the interfacial properties between ML/BL WSe2 and…
The present work critically investigates the influence of low melting glasses on the fabrication of metal contacts, with the goal of advancing applications of bismuth based oxide glass and screen printed silver contacts for use in…
The effect of platinum (Pt) bottom electrode texture on the tetragonality, dielectric, ferroelectric, and polarization switching response of pulsed laser deposited Ba0.8Sr0.2TiO3 (BST) thin films has been studied. The x-ray diffraction and…