Related papers: Timing System of SPring-8 Booster Synchrotron
We present the results of an upgrade to the D0 muon system. Scintillating counters have been added to the existing central D0 muon system to provide rejection for cosmic ray muons and out-of-time background, and to provide additional fast…
An automatic clock synchronizing method implemented in field programmable gate array (FPGA) is proposed in this paper. It is developed for the clock system which will be applied in the end-cap time of flight (ETOF) upgrade of the Beijing…
We have designed a system to stabilize the gain of a submillimeter heterodyne receiver against thermal fluctuations of the mixing element. In the most sensitive heterodyne receivers, the mixer is usually cooled to 4 K using a closed-cycle…
This letter introduces a novel wireless-powered backscatter communication system which allows sensors to utilize RF signals transmitted from a dedicated RF energy source to transmit data. In the proposed system, when the RF energy source…
We have introduced a mechanism for synchronizing chaotic systems by one way coupling with a variable delay that is reset at finite intervals. Here we extend this method to time delay systems and suggest a new cryptosystem based on this. We…
We propose a semi-analytical method of calculating the timing fluctuations in mode-locked semiconductor lasers and apply it to study the effect of delayed coherent optical feedback on pulse timing jitter in these lasers. The proposed method…
High-precision optical pulse trains distribution via fibre links has made huge impacts in many fields. In most published works, the accuracies are still fundamentally limited by some unavoidable noises, such as thermal and shot noise from…
A fully analytical controller design is proposed to tackle a periodic control problem for stable linear systems with an input delay. Applying the internal model control scheme, the controller design reduces to designing a filter, which is…
We present an improvement of short term frequency stability of the integrating sphere cold atom clock after increasing the intensities of clock signals and optimizing the feedback loop of the clock. A short term frequency stability of…
The beam position monitor (BPM) system for Fermilab Switchyard (SY) provides the position, intensity and integrated intensity of the 53.10348 MHz RF bunched resonant extracted beam from the Main Injector over 4 seconds of spill. The total…
Synchrotron radiation with the characteristic of high brilliance, high level of polarization, high collimation, low emittance and wide tunability in energy has been used as a standard source in metrology(1, 2). For a decade, lots of…
The SNS SRF system is operated with a pulsed beam. For the SRF system to track the repetitive reference trajectory, a feedback and a feedforward controllers has been proposed. The feedback controller is to guarantee the closed loop system…
Project-X is a leading candidate of the next major accelerator construction project at Fermilab. The mission need of Project-X is to establish an intensity frontier for particle physics research, or more precisely, to build a multi-MW…
A superconducting radio-frequency (SRF) photo injector is in operation at the electron linac for beams with high brilliance and low emittance (ELBE) radiation center and generates continuous wave (CW) electron beams with high average…
Fast timing detectors are an essential element in the experimental setup for time-of-flight (ToF) mass measurements of unstable nuclei. We have upgraded the scintillator detectors used in experiments at the National Superconducting…
We study the efficiency of synchronization in ensembles of identical coupled stochastic oscillator systems. By deriving a chemical Langevin equation, we measure the rate at which the systems synchronize. The rate at which the difference in…
In this paper, an overcurrent protection system is designed to ensure the safety of the gyrotrons in the EAST ECRH system. Two overcurrent protection systems were established, a fast one and a slow one. The fast one uses the current…
A proof-of-principle experimental setup for the extraction of 6 GeV electrons from the DESY II Booster Synchrotron using the channeling effect in a bent crystal is elaborated. Various aspects of the experimental setup were investigated in…
Synchrotrons are powerful and productive in revealing the spatiotemporal complexities in matter. However, X-ray pulses produced by the synchrotrons are predetermined in specific patterns and widths, limiting their operational flexibility…
The achievable acquisition rates of modern triggered nuclear physics experiments are heavily dependent on the readout software, in addition to the limits given by the utilized hardware. This paper presents an asynchronous readout scheme…