Related papers: Effect of Insertion Devices in SPEAR 3
The SSRL is investigating an accelerator upgrade project to replace the present 130 nm rad FODO lattice with an 18 nm rad double bend achromat lattice: SPEAR 3. In this paper, we review the methods used to maximize the SPEAR 3 dynamic…
The Stanford Synchrotron Radiation Laboratory is investigating an accelerator upgrade project that would replace the present 130 nm rad FODO lattice with an 18 nm rad double bend achromat (DBA) lattice: SPEAR 3. The low emittance design…
With the advancement of accelerator light sources, the application of wiggler becomes more and more important, for example to speed up damping or generate synchrotron radiation. The quantum excitation contribution of such a wiggler to the…
The SPEAR 3 light source has two 7.6 m straight sections one of which is available for new insertion devices (ID). By reducing the vertical beta function at the center of the straight from 9.8 m to 1.5 m, the beam size can be decreased from…
A common strategy to compensate for losses in optical nanostructures is to add gain material in the system. By exploiting slow-light effects it is expected that the gain may be enhanced beyond its bulk value. Here we show that this route…
In this work, we introduce the platform of plasmonic Doppler grating (PDG) to experimentally investigate the enhancement effect of plasmonic gratings in the input and output beams of nonlinear surface-enhanced coherent anti-Stokes Raman…
The effect of 30 keV Ga^+ ion beam irradiation on the low-temperature photoluminescence from a single crystal of the hybrid organic-inorganic perovskite MAPbBr3 is presented for the first time. The irradiation leads to the suppression of…
In this article, we share our experience related to the new photo-injector commissioning at the SPARC\_LAB test facility. The new photo-injector was installed into an existing machine and our goal was not only to improve the final beam…
There are numerous advantages to exploiting diffraction-limited instrumentation at astronomical observatories, which include smaller footprints, less mechanical and thermal instabilities and high levels of performance. To realize such…
Intensity minima and maxima of speckle patterns obtained behind a diffuser are experimentally interchanged by applying a spiral phase delay of charge $\pm 1$ to the impinging coherent beam. This transform arises from the intuitive…
The third-order optical nonlinearity in optical waveguides has found applications in optical switching, optical wavelength conversion, optical frequency comb generation, and ultrafast optical signal processing. The development of an…
In any polarimetric measurement technique, enhancing the laser polarization change of a laser beam before it reaches the analyzer can help in improving the sensitivity. This can be performed using an optical component having a large linear…
Detrimental beam dynamics effects limit performance of high intensity rapid cycling synchrotrons (RCS) such as the 8 GeV proton Fermilab Booster. Here we report the results of comprehensive experimental studies of various beam intensity…
The spectral resolution of a dispersive spectrograph is dependent on the width of the entrance slit. This means that astronomical spectrographs trade-off throughput with spectral resolving power. Recently, optical guided-wave transitions…
A new beam injection scheme is proposed for the Fermilab Booster to increase beam brightness. The beam is injected on the deceleration part of the sinusoidal magnetic ramp and capture is started immediately after the injection. During the…
Three storage ring lattices have been designed as options for a future upgrade of the Stanford synchrotron radiation lightsource (SSRL). The three options differ in circumference and targeted future site, with one to be built in the tunnel…
Integrable optics is an innovation in particle accelerator design that potentially enables a greater betatron tune spread and damps collective instabilities. An integrable rapid-cycling synchrotron (RCS) would be an effective replacement…
Loss is a crucial problem in plasmonic integrated optical circuits and metamaterials. The Er, Yb codoped gain material is introduced into a magnetic plasmon waveguide composed of a chain of nanosandwiches in order to solve the loss problem…
Methods to increase the light scattered from small particles can help improve the sensitivity of many sensing techniques. Here, we investigate the role multiple scattering plays in perturbing the scattered signal when a particle is added to…
Spatial scan observations using WFC3's IR channel exhibit time-dependent systematics (in the form of a ramp or hook) that have been attributed to the effects of persistence. The amplitude of these systematics is often two orders of…