Related papers: Beam Loading Compensation in the Main Linac of CLI…
The CSR-LINAC injector has been proposed in Heavy Ion Research Facility in Lanzhou (HIRFL). The linac mainly consists of two parts, the RFQ and the IH-DTL. The KONUS (Kombinierte Null Grad Struktur) concept has been introduced into the DTL…
The Compact Linear Collider (CLIC) targets a nanometre beam size at the collision point. Realising this beam size requires the generation and transport of ultra-low emittance beams. Dynamic imperfections can deflect the colliding beams,…
As the pre-injector of the LHC injector chain, the proton linac at CERN is required to provide a high-intensity (180mA) beam to the Proton Synchrotron Booster. The results of measurements at this intensity will be presented. Furthermore,…
A light source based on an Energy Recovered Linac (ERL) [1] consist of a superconducting linac and a transfer line that includes wigglers and undulators to produce the synchrotron light. The transfer line brings the electrons bunches back…
Generally, a standard bunching system is composed by a SW pre-buncher, a TW buncher and a standard accelerating section. However, there is one way to simplify the whole system to some extent by using the hybrid buncher, which is a combined…
Significant progress has been made to develop silicon pixel technologies for use in the vertex and tracker regions of the proposed Compact Linear Collider (CLIC) detector design. The electron-positron collisions generated by this linear…
Suppression of beam losses is essential for successful operation of high-intensity linac. Historically, the values of the field amplitudes and phases of the side-coupled, 805-MHz LANSCE linac modules are maintained using a well-known…
The Compact Linear Collider (CLIC) is a mature option for the future of high energy physics. It combines the benefits of the clean environment of $e^+e^-$ colliders with operation at high centre-of-mass energies, allowing to probe scales…
This report describes a concept of an EIC cooling system, based on a proven induction linac technology with a dc electron beam. The system would operate in a full energy range of proton beams (100 - 270 GeV) and would provide 50-100 A…
The advantage of the linac-ring type electron proton collider is that it allows for the straightforward construction of $\gamma$p collider. In a $\gamma$p collider high energy photons can be generated from Compton backscattering of laser…
The beam-beam interaction is one of the dominant sources of emittance growth and luminosity lifetime deterioration. A current carrying wire has been proposed to compensate long-range beam-beam effects in the LHC and strong localized…
In particle accelerators, transverse-longitudinal coupling (TLC) dynamics can be invoked for efficient bunch compression or high harmonic generation when one of the transverse eigenemittance is small. In this sense, complete or partial…
This article presents a new particle beam cooling scheme, namely cyclotron maser cooling (CMC). Relativistic gyrating particles, forced by a solenoidal magnetic field over some length of their trajectory, move in a helical path and undergo…
Free Electron Lasers driven by Super-Conducting Linacs require the generation, acceleration and transport of trains of bunches with high charge, high repetition rate and low emittance. A numerical model already developed for the modeling of…
In this paper, we give some guidelines for the design of linear accelerators, with special emphasis on their use in a hadron therapy facility. We concentrate on two accelerator layouts, based on linacs. The conventional one based on a linac…
The match between the Linac beam energy and the energy determined by the bending field of the Booster magnets is crucial for rf capture, beam quality, and the transmission efficiency in a Booster cycle. The observation of the injection…
Beam steering involves the calibration of the angle and position at which a particle accelerator's electron beam is incident upon the x-ray target with respect to the rotation axis of the collimator. Beam Steering is an essential task for…
A bunching system is proposed for the initial stage of CTF3 which consists of one (two) 3 GHz prebunchers and one 3 GHz travelling wave (TW) buncher with variable phase velocities. The electron beam is emitted from a 140 KV DC gun. Since…
Convolutional Neural Networks (CNNs) are one of the most successful deep machine learning technologies for processing image, voice and video data. CNNs require large amounts of processing capacity and memory, which can exceed the resources…
A problem of load balancing in isolated DC microgrids is considered in this paper. Here, a DC load is fed by multiple heterogenous DC sources, each of which is connected to the load via a boost converter. The gains of the DCC's provide for…