Related papers: Beam Position-Phase Monitors for SNS Linac

We experimentally investigate on-chip control and analysis of spatially multimode nonlinear interactions in silicon nitride waveguide circuits. Using widely different dispersion of transverse supermodes in a strongly-coupled dual-core…

This paper presents the uTCA4.0-based BPM electronics for PIP-II, featuring four 250 MSPS ADCs and a Xilinx UltraScale+ MPSoC FPGA with 10 GbE uplink. Design elements include signal conditioning, clock, and thermal management. The FPGA…

We are developing position sensitive silicon detectors (PSD) which have an electrode at each of four corners so that the incident position of a charged particle can be obtained using signals from the electrodes. It is expected that the…

Anomalies in radio-frequency (RF) stations can result in unplanned downtime and performance degradation in linear accelerators such as SLAC's Linac Coherent Light Source (LCLS). Detecting these anomalies is challenging due to the complexity…

To address the challenges that the decarbonization of the energy sector is bringing about, advanced distribution network management and operation strategies are being developed. Many of these strategies require accurate network models to…

The contemporary superconductive electronics is widely using planar circuits with micrometer-scale elements for a variety of applications. With the rise of complexity of a circuit and increased number of its components, a simple impedance…

This introduction on beam position monitors (BPM) summarizes the fundamental parts of the tutorial presented at the CAS 2018 on beam instrumentation. The focus is on the signal detection and normalization, and on the principle of operation…

This paper presents a new method for studying electromechanical transients in power systems using three phase, combined transmission and distribution models (hybrid models). The methodology models individual phases of an electric network…

Millimeter-Wave (mm-Wave) frequency bands provide an opportunity for much wider channel bandwidth compared with the traditional sub-6 GHz band. Communication at mm-Waves is, however, quite challenging due to the severe propagation path…

The fields produced by a long beam with a given transverse charge distribution in a homogeneous vacuum chamber are studied. Signals induced by a displaced finite-size beam on electrodes of a beam position monitor (BPM) are calculated and…

We present a distributed antenna array supporting open-loop distributed beamforming at 1.5 GHz. Based on a scalable, high-accuracy internode ranging technique, we demonstrate open-loop beamforming experiments using three transmitting nodes.…

A design study of the diagnostics of a high brightness linac, based on X-band structures, and a plasma accelerator stage, has been delivered in the framework of the EuPRAXIA@SPARC_LAB project. In this paper, we present a conceptual design…

PIP-II beam transfer line (BTL) to transport the beam from PIP-II Linac to the Booster ring at Fermilab. One crucial aspect of the BTL design involved the implementation of collimators. These collimators play a vital role in removing large…

A beam monitor detector prototype based on doped silica fibres coupled to optical fibres has been designed, constructed and tested, mainly for accelerators used in medical applications. Scintillation light produced by Ce and Sb doped silica…

A high precision beam monitor system based on silicon carbide PIN sensor is designed for China Spallation Neutron Source 1.6 GeV proton beam to monitor the proton beam fluence.The concept design of the beam monitor system is finished…

Electron diffraction through a thin patterned silicon membrane can be used to create complex spatial modulations in electron distributions by varying the intensity of different reflections using parameters such as crystallographic…

Fermilab has developed a novel concept for an industrial electron linac using Nb3Sn coating technology and conduction cooling. These conduction-cooled linacs can generate electron beam energies up to 10 MeV in continuous-wave operation and…

An innovative solution, based on the exploitation of the harmonic beams generated by time-modulated electromagnetic skins (TM-EMSs), is proposed for the implementation of integrated sensing and communication (ISAC) functionalities in a…

Dynamic control of laser emission direction is crucial for developing compact and reconfigurable nanophotonic devices. In this work, we numerically present a plasmonic nanolaser (PNL) integrated with a voltage-controlled liquid crystal (LC)…

Transverse 2D phase space distribution of a 2.1 MeV, 5 mA H$^-$ beam is measured at the PIPIT test accelerator at Fermilab with an Allison scanner. The paper describes the design, calibration, and performance of the scanner as well as the…