Related papers: Characterization of a high-power tapered semicondu…
A conceptual design work and a basic experimental study of a new beam profile monitor have been performed. The monitor will be used to measure emittance of an electron beam in the ATF damping ring at KEK, in which the transverse beam size…
A design strategy for achieving broadband optical gain in GaSb-based semiconductor amplifiers operating beyond 2 \mu m is presented. By employing asymmetric GaInSb/AlGaAsSb quantum wells (QWs) of varying thicknesses, a flat and wide gain…
Supercontinuum generation is performed in the bulk semiconductor tellurium (Te) with a high-power picosecond CO$_2$ laser at peak intensities up to 20 GW/cm$^2$. The spectrum spans from the second harmonic of the pump at 5.3 $\mu$m to 32…
Titanium doped sapphire (Ti:sapphire) is a laser gain material with broad gain bandwidth benefiting from the material stability of sapphire. These favorable characteristics of Ti:sapphire have given rise to femtosecond lasers and optical…
The linewidth enhancement factor (LEF) has recently moved into the spotlight of research on frequency comb generation in semiconductor lasers. Here we present a novel modulation experiment, which enables the direct measurement of the…
A novel mode-locked fiber laser based on offset splicing technology between two kinds of graded index multimode fibers is proposed and experimentally demonstrated. The offset splice spot structure acts as a saturable absorber via nonlinear…
We report supercontinuum generation by launching femtosecond Yb fiber laser pulses into a tapered single-mode fiber of 3 um core diameter. A spectrum of more than one octave, from 550 to 1400 nm, has been obtained with an output power of…
We report on the design and whole characterization of low-noise and affordable-cost Yb-doped double-clad fiber amplifiers operating at room temperature in the near-infrared spectral region at pulse repetition rate of 160 MHz. Two different…
Multimode fibers provide a promising platform for realizing high-power laser amplifiers with suppressed nonlinearities and instabilities. The potential degradation of optical beam quality has been a major concern for highly multimode fiber…
An ultrafast laser delivering 10.4 kW average output power based on coherent combination of twelve stepindex fiber amplifiers is presented. The system emits close-to-transform-limited 254 fs pulses at 80 MHz repetition rate, has a high beam…
A stable, continuous wave, single frequency fiber amplifier system at 1015 nm with 10W output power is presented. It is based on a large mode double clad fiber cooled to liquid nitrogen temperature. The amplified light is frequency…
We characterize a semiconductor external cavity diode laser whose optical feedback is provided by a guided mode resonance filter (GMRF). We focus on the spectral properties. The wavelength of operation falls in the telecom range (1506 nm).…
We report the first experimental demonstration of efficient and high-power operation of a Ti:sapphire laser pumped by a simple, compact, continuous-wave (cw) fiber-laser-based green source. The pump radiation is obtained by direct…
We present broadband parametric amplifiers based on the kinetic inductance of superconducting NbTiN thin films in an artificial (lumped-element) transmission line architecture. We demonstrate two amplifier designs implementing different…
Erbium (Er) ions are the gain medium of choice for fiber-based amplifiers and lasers, offering a long excited-state lifetime, slow gain relaxation, low amplification nonlinearity and noise, and temperature stability compared to…
We realize a laser with a cloud of cold rubidium atoms as gain medium, placed in a low-finesse cavity. Three different regimes of laser emission are observed corresponding respectively to Mollow, Raman and Four Wave Mixing mechanisms. We…
Generating high output powers while achieving narrow line single mode lasing are often mutual exclusive properties of commercial laser diodes. For this reason, efficient and scalable amplification of narrow line laser light is still a major…
Transverse Mode Instability (TMI) which results from dynamic nonlinear thermo-optical scattering is the primary limitation to power scaling in high-power fiber lasers and amplifiers. It has been proposed that TMI can be suppressed by…
At Argonne National Laboratory, we are developing hard X-ray (2 to 20 keV) Transition Edge Sensor (TES) arrays for beamline science. The significantly improved energy resolution provided by superconducting detectors compared to…
An analytically expression for the temperature dependence of the signal gain of an erbium-doped fiber amplifier (EDFA) pumped at 1480 \textit{nm} are theoretically obtained by solving the propagation equations with the amplified spontaneous…