Related papers: Control System of the Bepcii
The Beijing Electron Collider is being upgraded (BEPCII) to a two-ring collider with a design luminosity of $1 \times 10^{33}$cm$^{-2}$ s$^{-1}$ at a center-of-mass energy of 3.89 GeV. It will operate between 2 and 4.2 GeV in the center of…
The Beijing Electron Collider has been upgraded (BEPCII) to a two-ring collider with a design luminosity of $1 \times 10^{33}$cm$^{-2}$ s$^{-1}$ at a center-of-mass energy of 3.78 GeV. It will operate between 2 and 4.6 GeV in the center of…
The Status of BEPCII/BESIII upgrade is described, BEPCII is designed to reach a luminosity of $10^{33}/cm^{-2}s^{-1}$ at c. m. energy of 3.89GeV, and BESIII detector is fully rebuilt. The project is on track and is progressing well. The…
In this paper BEPC, BEPCII and BEPCII-U have been briefly reviewed, which lay a good foundation of CEPC as a Higgs factory. BEPCII reached the designed luminos-ity goal of 10^33cm^-2s^-1 @1.89GeV on April 5, 2016. As an upgrade program of…
We will use EPICS toolkit [1] to build a prototype for upgrading BEPC control system. The purposes are for the following three aspects: (1) Setup a network based distributed control system with EPICS. (2) Study some front-end control…
The Beijing Electron-Positron Collider (BEPC) has been running for both high energy physics (HEP) and synchrotron radiation (SR) researches since 1989. Good performance of BEPC accomplishes a lot of achievements in the tau-charm region over…
We first introduce the design parameters of the Beijing Electron-Positron Collider II (BEPCII) and the simulation study of beam-beam effects during the design process of the machine. The main advances since 2007 are briefly introduced and…
In this paper the status and prospects for BESIII is presented.The BEPCII machine is in good status and recently reached its highest luminosity of 7.08*10^32cm^-2s^-1. The BESIII detectors have been running stably since 2009. Upgrade plans…
Using 58 million $J/\psi$ and 14 million $\psi(2S)$ events collected by the BESII detector at the BEPC, branching fractions or upper limits for the decays $J/\psi$ and $\psi(2S) \to \Lambda \bar{\Lambda} \pi^0$ and $\Lambda \bar{\Lambda}…
Implementation and commissioning of the EPICS based control system for the ISAC radioactive beam facility was completed. The target ion source, mass separator, and low-energy beam-lines started beam production for experiments. In parallel,…
It is proposed to upgrade the endcap time-of-flight (ETOF) of the Beijing Spectrometer III (BESIII) with multi-gap resistive plate chamber (MRPC), aiming at overall time resolution about 80 ps. After the entire electronics system is ready,…
The Superconducting Radio Frequency (SRF) system of the upgrade project of Beijing Electron Positron Collider (BEPCII) has been in operation for almost 8 years. The SRF system has accelerated both electron and positron at the design beam…
In order to ensure the beam quality and meet the requirements introduced by the BEPCII storage ring, the beam energy feedback system has been developed at the exit of the linac. This paper describes the implementation and commissioning of…
The injection control system of Hefei Light Source (HLS) storage ring is a subsystem of the upgraded HLS control system, which is based upon EPICS. Three programmable logic controllers (PLCs) are used as device controllers, which control…
In the next decade, intensity frontier experiments will require tracking systems that are robust against high event and background rates while maintaining excellent tracking performance. We develop a first conceptual design of a tracking…
The beam energy measurement system is of great importance and profit for both BEPC-II accelerator and BES-III detector. The system is based on measuring the energies of Compton back-scattered photons. Many advanced techniques and precise…
The ALICE collaboration consolidated and completed the installation of current detectors during LS1 with the aim to accumulate 1 nb$^{-1}$ of Pb-Pb collisions during Run 2 corresponding to about 10 times the Run 1 integrated luminosity. In…
Precision beam polarization measurements based on Compton polarimeters are essential for the physics program of future high-energy colliders. In order to prepare for these and to extend the scope of physics measurements of the BESIII…
In this paper I will commend on the early CEPC design as of October 2014. In particular I will comment on the choice of circumference, minimum and maximum energy, number of collision points and target luminosity. I will finish with…
The Circular Electron Positron Collider (CEPC) is a large scientific project initiated and hosted by China, fostered through extensive collaboration with international partners. The complex comprises four accelerators: a 30 GeV Linac, a 1.1…