Related papers: Electrical Properties of Carbon Fiber Support Syst…
Data transmission at the upgraded Large Hadron Collider experiments, foreseen for mid 2020s will be in the multi Gbit/s range per connection for the innermost detector layers. This paper reports on first tests on the possible use of carbon…
Future collider detectors, including silicon tracking detectors planned for the High Luminosity LHC, will require components and mechanical structures providing unprecedented strength-to-mass ratios, thermal conductivity, and radiation…
Detector mechanics can play a significant role in a detector's performance, improvements typically require in-depth study of total mass, novel ways to reduce the total mass, as well as more integrated design concepts to save on material…
The performance of a scintillating fiber detector prototype for tracking under high rate conditions is investigated. A spatial resolution of about100 micron is aimed for the detector. Further demands are low occupancy and radiation hardness…
A procedure to characterize the electrical and mechanical properties of micro-fibers is presented here. As the required equipment can be found in many teaching laboratories, it can be carried out by physics and mechanical/electrical…
The last two decades, in particular, have witnessed a large volume of research revolving around structure-property correlation in Carbon based nanocomposites, synthesized by several methods.In the simplest of terms, the electronic…
Silicon based micropattern detectors are essential elements of modern high energy physics experiments. Cost effectiveness and high radiation resistance are two important requirements for technologies to be used in inner tracking devices.…
In the pursuit of advanced ceramic materials with exceptional irradiation-resistance and high-temperature tolerance for nuclear applications, compositionally complex carbides (CCCs) have emerged as a highly promising class of candidate…
The amount of data produced by highly granular silicon tracking detectors in high energy physics experiments poses a major challenge to readout systems. At high collision rates, e.g. at LHC experiments, only a small fraction of data can be…
Existing approaches for the field measurements of the frequency-dependent soil properties take a significant amount of time, making it difficult to obtain new experimental data and study the electrical soil properties further. However, a…
The development of highly-sensitive and miniaturized sensors that capable of real-time analytes detection is highly desirable. Nowadays, toxic or colorless gas detection, air pollution monitoring, harmful chemical, pressure, strain,…
We describe feedhorn-coupled polarization-sensitive detector arrays that utilize monocrystalline silicon as the dielectric substrate material. Monocrystalline silicon has a low-loss tangent and repeatable dielectric constant,…
Carbon dioxide is a vital gas for life on Earth, a waste product of human activities, and widely used in agriculture and industry. Its accurate sensing is therefore of great interest. Optical sensors exploiting the mid-infrared light…
For many years there has been an aspiration within the community to develop curved silicon detectors for particle physics applications. We present the results from 10 x 10cm low mass support modules as a part of the "ZeroMass" project that…
Characterization of the minute cosmic microwave background polarization signature requires multi-frequency, high-throughput precision instrument systems. We have previously described the detector fabrication of a 40 GHz focal plane and now…
We fabricate and characterize carbon-fiber tips for their use in combined scanning tunneling and force microscopy based on piezoelectric quartz tuning fork force sensors. An electrochemical fabrication procedure to etch the tips is used to…
Fiber optic sensing is becoming an important means to physically secure today's network infrastructure. However, a network-wide deployment of the monitors will require cost reduction of the interrogator system, which can only be achieved by…
The excellent structural and piezoresistive properties of continuous carbon fiber make it suitable for both structural and sensing applications. This work studies the use of 3D printed, continuous carbon fiber reinforced beams as…
Several future high-energy physics facilities are currently being planned. The proposed projects include high energy $e^+ e^-$ circular and linear colliders, hadron colliders and muon colliders, while the Electron-Ion Collider (EIC) has…
Carbon nanofibres (CNF) were dispersed into an epoxy resin using a combination of ultrasonication and mechanical mixing. The electronic transport properties of the resulting composites were investigated by means of impedance spectroscopy.…