Related papers: Beam Based Alignment of Interaction Region Magnets
We propose a method to simultaneously determine the magnetic centers of multiple quadrupoles in a transport line or a storage ring. The method finds the magnet centers by correcting the orbit shift due to a change of the quadrupole gradient…
The undulator line of the Shanghai soft X-ray Free-electron Laser facility (SXFEL) has very tight tolerances on the straightness of the electron beam trajectory. However, the beam trajectory cannot meet the lasing requirements due to the…
Beam position monitor (BPM) can easily reinforce the handling of beam orbits and measure the absolute beam position [1]. Its data can be used to optimize and correct beam in both first turn and closed orbit mode. In order to set the…
A method is presented for characterizing the emittance dilution and dynamic aperture for an arbitrary closed lattice that includes guide field magnet errors, multipole errors and misalignments. This method, developed and tested at the…
Magnet errors in storage rings significantly degrade beam performance, impacting the brightness and stability of the light source. Therefore, beam-based correction is crucial for the safe operation of machines and the stability of radiated…
Resonant soft x-ray Bragg diffraction at the Tb M4,5 edges and non resonant Bragg diffraction have been used to investigate orbitals in TbB2C2. The Tb 4f quadrupole moments are ordered in zero field below T_N and show a ferroquadrupolar…
The correction of closed orbit has great influence on the operation of synchrotron. The design of correction system is one significant component of lattice design. It is suggested to set BPMs at the peaks of betatron oscillation. The…
We report on measurements and modeling studies performed from 2021 to 2024 on the 76 sextupole magnets in the Cornell Electron-positron Storage Ring CESR. Beam-based, magnet-specific calibrations ($K_2$ value versus excitation current) were…
In superconducting linear accelerators (linacs), accurately monitoring beam dynamics is essential for minimizing beam losses and ensuring stable operations. However, destructive diagnostics must be avoided in superconducting sections to…
Narrow beams are key to wireless communications in millimeter wave frequency bands. Beam alignment (BA) allows the base station (BS) to adjust the direction and width of the beam used for communication. During BA, the BS transmits a number…
We present a new symmetry-based concept for an achromatic low-beta collider interaction region design. A specially-designed symmetric Chromaticity Compensation Block (CCB) induces an angle spread in the passing beam such that it cancels the…
Physically speaking, the delta function like beam-beam nonlinear forces at interaction points (IPs) act as a sum of delta function nonlinear multipoles. By applying the general theory established in ref. 1, in this paper we investigate…
Experiments using polarized $^{3}He$ atom beams to search for short range spin dependent forces are proposed. High intensity, high polarization, small beam size $^{3}He$ atom beams have been successfully produced and used in surface science…
This lecture gives an overview of the impacts on linear machine optics of machine imperfections due to incorrect field settings and misalignments. The effects of imperfections in dipole, quadrupole, and sextupole magnets are presented,…
In the first part of the paper a generalized theoretical approach towards beam coupling impedances and stretched-wire measurements is introduced. Applied to a circular symmetric setup, this approach allows to estimate the systematic…
Communication in Millimeter wave (mmWave) band relies on narrow beams due to directionality, high path loss, and shadowing. One can use beam alignment (BA) techniques to find and adjust the direction of these narrow beams. In this paper, BA…
Many advanced techniques have been developed, tested and implemented in the last decades in almost all circular accelerators across the world to measure the linear optics. However, the greater availability and accuracy of beam diagnostics…
In light optics, beams with orbital angular momentum (OAM) can be produced by employing a properly-tuned two-cylinder-lens arrangement, also called $\pi$/2 mode converter. It is not possible to convey this concept directly to the beam in an…
Turn-By-Turn (TBT) betatron oscillation data is a very powerful tool in studying machine optics. Hundreds and thousands of turns of free oscillations are taken in just few tens of milliseconds. With beam covering all positions and angles at…
Beam alignment (BA) in modern millimeter wave standards such as 5G NR and WiGig (802.11ay) is based on exhaustive and/or hierarchical beam searches over pre-defined codebooks of wide and narrow beams. This approach is slow and…