Related papers: Beam Based Alignment of Interaction Region Magnets
The efficiency of beam injection in circular accelerators can be impacted by unknown aperture limitations in the vacuum chamber. These limitations can be detected by introducing localized distortions to the closed orbit of the circulating…
The design of an Interaction Region (IR) suitable to reach low values of the beta functions at the Interaction Point (IP) and a high collision frequency is a rather difficult task in a short ring as DAPHNE, where an upgrade of the peak…
Existing beam contact formulations can be categorized in point contact models that consider a discrete contact force at the closest point of the beams, and line contact models that assume distributed contact forces. In this work, it will be…
Beam steering enables manipulation of the electromagnetic radiation patterns in antenna array systems. A methodology for steering beams in the near field of a planar antenna array with known phase wavefront functions towards arbitrary…
The discovery potential of the HERA collider, with and without polarized beams, for electron-quark contact interactions in neutral current scattering is reviewed. The measurement of spin asymmetries in the polarized case could give crucial…
In remote sensing rotated object detection, mainstream methods suffer from two bottlenecks, directional incoherence at detector neck and task conflict at detecting head. Ulitising fourier rotation equivariance, we introduce Fourier Angle…
The spin orbit interaction plays a crucial role in diverse fields of condensed matter, including the investigation of Majorana fermions, topological insulators, quantum information and spintronics. In III V zinc blende semiconductor…
Ground-based optical long-baseline interferometry has the power to measure the orbits of close binary systems at ~10 micro-arcsecond precision. This precision makes it possible to detect "wobbles" in the binary motion due to the…
We discuss electron-electron contact-interaction searches in the Bhabha and Moller processes at planned Linear Colliders run in the electron-positron and electron-electron modes, with longitudinally polarized beams. Our analysis is based on…
The Oide effect considers the synchrotron radiation in the final focusing quadrupole and it sets a lower limit on the vertical beam size at the Interaction Point, particularly relevant for high energy linear colliders. The theory of the…
Optical technology may provide important architectures for future computing, such as analog optical computing and image processing. Compared with traditional electric operation, optical operation has shown some unique advantages including…
Up to now, the completion of an ALMA interferometric observation is determined based on the achievement of a given shape and size of the synthesized beam and the noise RMS in the representative spectral range. This approach with respect to…
Coulomb integrals, i.e., matrix elements of bare or screened Coulomb interaction between one-electron orbitals, are fundamental objects in many approaches developed to tackle the challenging problem of calculating the electronic structure…
We present a tracking algorithm to maintain the communication link between a base station (BS) and a mobile station (MS) in a millimeter wave (mmWave) communication system, where antenna arrays are used for beamforming in both the BS and…
Accurate and fast beam-alignment is essential to cope with the fast-varying environment in millimeter-wave communications. A data-driven approach is a promising solution to reduce the training overhead by leveraging side information and…
The objective of this work is the development of a novel finite element formulation describing the contact interaction of slender beams in complex 3D configurations involving arbitrary beam-to-beam orientations. It is shown in a…
Optical navigation on a CubeSat must rely on the best extraction of the directions of some beacons from on-board images. We present an experiment on OPS-SAT, a CubeSat of the European Space Agency (ESA), that will characterize an onboard…
A conventional method to determine beam parameters is using the profile measurements and converting them into the values of twiss parameters and beam emittance at a specified position. The beam information can be used to improve transverse…
It is known, that at high energies of ions (more than 10 MeV for light ions) the focusing by magnetic quadrupole fields is most effective, whereas at small energies (less than 1 MeV) - the focusing by electrical quadrupole fields. At…
Bundle adjustment (BA) is a technique for refining sensor orientations of satellite images, while adjustment accuracy is correlated with feature matching results. Feature match-ing often contains high uncertainties in weak/repeat textures,…