Related papers: Mechanical Dissipation in Silicon Flexures
This study presents a fabrication process for lithium-drifted silicon (Si(Li)) detectors that, compared to previous methods, allows for mass production at a higher yield, while providing a large sensitive area and low leakage currents at…
The regulation of temperature at the macro and microscale is a major energy-consuming process of humankind. Modern cooling systems account for 15% of the global energy consumption and are responsible for 10% of greenhouse gas emissions. Due…
Characterization of the vacuum ultraviolet (VUV) reflectance of silicon photomultipliers (SiPMs) is important for large-scale SiPM-based photodetector systems. We report the angular dependence of the specular reflectance in a vacuum of…
Journal ref.: J. Phys.: Condens. Matter 25, 065602 (2013): We investigated the optical reflectivity of the heavy-fermion metal CeCu2Si2 in the energy range 3 meV - 30 eV for temperatures between 4K - 300K. The results for the charge…
The low thermal conductivity of silicon nanostructures, with respect to bulk silicon, opens excellent possibilities for thermoelectric applications because it will enable the use of silicon for the high efficient direct conversion of wasted…
When the sulfur element is hyperdoped into crystalline silicon to a supersaturated density of 1020 cm-3, it can enhance the sub-bandgap light absorption of silicon from 0 to 70%, with the antireflection of surface dome structures. On the…
Millimeter-wave transmission measurements have been performed in amorphous niobium-silicon alloy samples where the DC conductivity follows the critical temperature dependence $\sigma_{dc} \propto T^{1/2}$. The real part of the conductivity…
We report on the development of a sub-kelvin, single-crystal silicon Fabry-Perot cavity. Operating such a cavity below 1~K should reduce the thermal noise limit of the cavity, and by this way address the current limitations of ultrastable…
For decades, mechanical resonators with high sensitivity have been realized using thin-film materials under high tensile loads. Although there have been remarkable strides in achieving low-dissipation mechanical sensors by utilizing high…
Tin-containing nanocrystals, embedded in silicon, have been fabricated by growing an epitaxial layer of Si_{1-x-y}Sn_{x}C_{y}, where x = 1.6 % and y = 0.04 %, followed by annealing at various temperatures ranging from 650 to 900 degrees C.…
We calculate the thermal noise in half-infinite mirrors containing a layer of arbitrary thickness and depth made of excessively lossy material but with the same elastic material properties as the substrate. For the special case of a thin…
Si deposition on H terminated Si(100)-2x1 and 3x1 surfaces at temperatures 300-530 K is studied by scanning tunneling microscopy. Hydrogen apparently hinders Si adatom diffusion and enhances surface roughening. The post-growth annealing…
We report a comprehensive study of magneto-transport properties in MoSi$_2$ bulk and thin films. Textured MoSi$_2$ thin films of around 70 nm were deposited on silicon substrates with different orientations. Giant magnetoresistance of 1000%…
Gallium oxide is an ultra-wide bandgap semiconductor with excellent opto-electronic properties, making it a highly promising material for a wide range of applications and devices. In this article, we report how the optical, morphological,…
We study the effect of the disorder on the metallic behavior of a two-dimensional electron system in silicon. The temperature dependence of conductivity $\sigma (T)$ was measured for different values of substrate bias, which changes both…
We have studied the dark conductivity of a broad microstructural range of plasma deposited single phase undoped microcrystalline silicon films in a wide temperature range (15 - 450K) to identify the possible transport mechanisms and the…
Molybdenum disilicide (MoSi$_2$) is a very promising material for high temperature structural applications due to its high melting point (2030 {\deg}C), low density, high thermal conductivity and good oxidation resistance. However, MoSi$_2$…
Aluminosilicate (Al-Si-O) thin films containing up to 31 at. % Al and 23 at. % Si were prepared by reactive RF magnetron co-sputtering. Mechanical and structural properties were measured by indentation and specular reflectance infrared…
Mechanical losses of crystalline silicon and calcium fluoride have been analyzed in the temperature range from 5 to 300 K by our novel mechanical spectroscopy method, cryogenic resonant acoustic spectroscopy of bulk materials (CRA…
A comprehensive numerical modelling of microcavity parameters for micropillar lasers with optical pumping was presented. The structure with a hybrid dielectric-semiconductor top mirror has a significantly higher calculated quality-factor…