Related papers: Selective readout and back-action reduction for wi…
We present the concept of a sensitive AND broadband resonant mass gravitational wave detector. A massive sphere is suspended inside a second hollow one. Short, high-finesse Fabry-Perot optical cavities read out the differential…
We study the sensitivity limits of a broadband gravitational-waves detector based on dual resonators such as nested spheres. We determine both the thermal and back-action noises when the resonators displacements are read-out with an…
We have implemented a novel scheme of signal readout for resonant gravitational wave detectors. For the first time, a capacitive resonant transducer has been matched to the signal amplifier by means of a tuned high Q electrical resonator.…
Sensitivity of gravitational-wave detectors (GWDs) is constrained at low frequencies by quantum radiation-pressure noise, a manifestation of the measurement's back action. One strategy to mitigate this back action involves employing…
Precision measurements using traditional heterodyne readout suffer a 3dB quantum noise penalty compared with homodyne readout. The extra noise is caused by the quantum fluctuations in the image vacuum. We propose a two-carrier…
Future interferometric gravitational wave detectors will make use of the coupling between shot noise and radiation pressure noise that produces a squeezed output for the quantum noise at the dark-port of the interferometer allowing these…
A novel method for extending frequency frontier in gravitational wave observations is proposed. It is shown that gravitational waves can excite a magnon. Thus, gravitational waves can be probed by a graviton-magnon detector which measures…
The binary neutron star coalescence GW170817 was observed by gravitational wave detectors during the inspiral phase but sensitivity in the 1-5 kHz band was insufficient to observe the expected nuclear matter signature of the merger itself,…
We describe an atom interferometric gravitational wave detector design that can operate in a resonant mode for increased sensitivity. By oscillating the positions of the atomic wavepackets, this resonant detection mode allows for coherently…
Ground-based gravitational wave detectors use laser interferometry to detect the minuscule distance change between test masses caused by gravitational waves. Stray light that scatters back into the interferometer causes transient signals…
We propose a tunable resonant sensor to detect gravitational waves in the frequency range of 50-300 kHz using optically trapped and cooled dielectric microspheres or micro-discs. The technique we describe can exceed the sensitivity of…
We apply the standard theory of the elastic body to obtain a set of equations describing the behavior of an acoustic Gravitational Wave detector, fully taking into account the 3-dimensional properties of the mass, the readout and the…
Searches for gravitational waves produced by coalescing black hole binaries with total masses $\gtrsim25\,$M$_\odot$ use matched filtering with templates of short duration. Non-Gaussian noise bursts in gravitational wave detector data can…
Gravitational waves modulate the apparent frequencies of other periodic signals. Low-frequency gravitational waves could therefore be detected by observing frequency modulations in signals from higher-frequency sources, e.g., those from…
A magnetically levitated mass couples to gravity and can act as an effective gravitational wave detector. We show that a superconducting sphere levitated in a quadrupolar magnetic field, when excited by a gravitational wave, will produce…
The seismically excited motion of high-Q pendula in gravitational-wave observatories sets a sensitivity limit to sub-audio gravitational-wave frequencies. Here, we report on the use of machine learning to predict the motion of a high-Q…
The millihertz gravitational wave band is expected to be opened by space-borne detectors like TianQin. Various mechanisms can produce short outbursts of gravitational waves, whose actual waveform can be hard to model. In order to identify…
We present a new differential mechanical gradiometer for the detection of low-frequency Gravitational Waves. The frequency range is 0.05 to 1 Hz, a frequency gap not covered either by future space-based detectors such as LISA or by…
We argue that dielectric haloscopes like MADMAX, originally designed for detecting axion dark matter, are also very promising gravitational wave detectors. Operated in resonant mode at frequencies around $\mathcal{O}(10\,\text{GHz})$, these…
The sensitivity of next-generation gravitational-wave detectors such as Advanced LIGO and LCGT should be limited mostly by quantum noise with an expected technical progress to reduce seismic noise and thermal noise. Those detectors will…