Related papers: Decrease of Ac Losses in High Tc Superconducting T…
Pressure is a key parameter for tuning or revealing superconductivity in materials and compounds. Many measurements of superconducting phase transition temperatures have been conducted using diamond anvil cells (DACs), which provide a wide…
The critical current of superconductors is commonly measured by testing unloaded wires under an external magnetic field. While stressed by intense Lorentz forces, the existing HTS/LTS superconductors are prone to a reduction in critical…
We present a method to systematically locate and extract capacitive and inductive losses in superconducting resonators at microwave frequencies by use of mixed-material, lumped element devices. In these devices, ultra-low loss titanium…
A series of new Cr$_{5+x}$Mo$_{35-x}$W$_{12}$Re$_{35}$Ru$_{13}$C$_{20}$ high-entropy alloys (HEAs) have been synthesized and characterized by x-ray diffraction, scanning electron microscopy, electrical resistivity, magnetic susceptibility…
We investigate the thermodynamic and transport properties of silver-substituted BaFe2As2 (122) crystals, up to ~4.5%. Similar to other transition-metal substitutions in 122, Ag diminishes the antiferromagnetic (TN) and structural (TS)…
We investigated the pressure dependence of the superconducting transition temperature ($T_{\rm c}$) in optimally doped Bi$_2$Sr$_2$Ca$_2$Cu$_3$O$_{10+\delta}$ (Bi-2223) single crystals using different pressure-transmitting media. Previous…
There are claims of synthesis of a room temperature superconductor. However, these claims have not been officially accepted by scientific communities. Currently, the highest transition temperature (Tc) recognized in scientific articles is…
Compared with silicon (Si) power devices, Silicon carbide (SiC) devices have the advantages of fast switching speed and low on-resistance. However, the effects of non-ideal characteristics of SiC MOSFETs and stray parameters (especially…
The powder in tube method has been used to fabricate Ag and Cu clad MgB2 wires using an in-situ reaction method. The effects of short time sintering on the critical current densities of Ag and Cu clad MgB2 wires were studied. All the…
A non-local Hall bar geometry is used to detect neutral-current Hall effects in graphene on silicon dioxide. Disorder is tuned by the addition of Au or Ir adatoms in ultra-high vacuum. A reproducible neutral-current Hall effect is found in…
With copper-substituted lead apatite below room temperature, we observe diamagnetic dc magnetization under magnetic field of 25 Oe with remarkable bifurcation between zero-field-cooling and field-cooling measurements, and under 200 Oe it…
We demonstrate a technique for creating high quality, large area tunnel junction barriers for normal-insulating- superconducting or superconducting-insulating-superconducting tunnel junctions. We use atomic layer depo- sition and an…
In recent years, tremendous progress has been made on complementary metal-oxide-semiconductor (CMOS) sensors for applications as X-ray detectors. To shield the visible light in X-ray detection, a blocking filter of aluminum is commonly…
Electrical spin injection from ferromagnetic metals into graphene is hindered by the impedance mismatch between the two materials. This problem can be reduced by the introduction of a thin tunnel barrier at the interface. We present room…
Since the discovery of superconductivity in nickelate thin films in 2019, the quest for enhancing their $T_c$ has been ongoing. Here we provide experimental evidence for $T_c$ enhancement in oxygen deficient films on highly reduced and…
We present temperature dependent resistivity and ac-calorimetry measurements of CeVSb3 under pressure up to 8 GPa in a Bridgman anvil cell modified to use a liquid medium and in a diamond anvil cell using argon as a pressure medium,…
We measured the resistivity, diamagnetization, and low-temperature specific heat of the newly discovered noncentrosymmetric superconductor Mg_(12-delta)Ir_19B_16. The temperature dependence of specific heat is consistent with the model of…
Fe-clad BaxK1-xFe2As2 superconducting tapes were fabricated by the ex situ powder-in-tube method combined with a short high-temperature annealing technique. The effect of annealing time and different dopants on the transport properties of…
The magnetic-field-tuned superconductor-insulator transition has been studied in ultrathin Beryllium films quench-condensed near 20 K. In the zero-current limit, a finite-size scaling analysis yields the scaling exponent product vz = 1.35…
Numerical simulations of the hysteretic ac loss in a coated superconductor with a more realistic version of architecture were performed via finite-element technique in the presence of an oscillating magnetic field. The coated superconductor…