Related papers: Characterization of irradiated microstructure by X…
Different techniques of the X-ray Diffraction Line Profile Analysis (XRDLPA) have been used to assess the microstructure of the irradiated Zr-1.0%Nb-1.0%Sn-0.1%Fe alloy. The domain size, microstrain, density of dislocation and the stacking…
The microstructural parameters like the average domain size, effective domain size at a particular crystallographic direction and microstrain within the domains of titanium and Ti-5%Ta-2%Nb, irradiated with 116 MeV O5+ ion, have been…
The diffraction peaks of Zircaloy-2 and Zr-2.5%Nb alloys at various deformations are found to be asymmetric in nature. In order to characterize the microstructure from these asymmetric peaks of these deformed alloys, X-Ray Diffraction Line…
Zirconium alloys are widely used as the fuel cladding material in pressurised water reactors, accumulating a significant population of defects and dislocations from exposure to neutrons. We present and interpret synchrotron microbeam X-ray…
The effects of Fe-ion irradiation on the crystal structure and superconducting properties of MgB$_2$ thin films were investigated. Pristine samples were prepared using hybrid physical-chemical vapor deposition (HPCVD), and ion irradiation…
Neutron irradiation progressively changes the properties of zirconium alloys: they harden and their average c/a lattice parameter ratio decreases with fluence. The bombardment by neutrons produces point defects, which evolve into…
Ferritic/martensitic steels will be used as structural components in next generation nuclear reactors. Their successful operation relies on an understanding of irradiation-induced defect behaviour in the material. In this study, Fe and FeCr…
Previous work on additively-manufactured oxide dispersion strengthened alloys focused on experimental approaches, resulting in larger dispersoid sizes and lower number densities than can be achieved with conventional powder metallurgy. To…
We demonstrate that powder diffraction data can be collected from sub-micron crystals of a mbrane protein with nearly two orders of magnitude more atoms than the molecules commonly used for powder diffraction. The crystals of photosystem-1…
We present a comprehensive study on the effects of proton irradiation at different energies (150 and 590 keV) with the fluence of 1x 1012 proton/cm2 on monolayer MoS2. This study not only improves our understanding of the influence of…
An accurate control of the optical properties of single crystal diamond during microfabrication processes such as ion implantation plays a crucial role in the engineering of integrated photonic devices. In this work we present a systematic…
Irradiation effects in Ni-17Mo-7Cr alloy, which is an newly developed structural material for molten salt reactor (MSR), have been systematically investigated by using 3MeV Au ions at different fluences, corresponding to dpa number…
Yttria stabilized Zirconia (YSZ) pellets with different crystallite sizes were irradiated with 80 MeV Ag$^{6+}$ ions at room temperature and 1000 K to understand the role of crystallite size/material microstructure and irradiation…
The physical property characterization of Al doped Mg1-xAlxB2 system with x = 0.0 to 0.50 is reported. The results related to phase formation, structural transition, resistivity R(T) and magnetization M(T) measurements are discussed in…
The effect of He-ion irradiation on a short-range ordering in model Fe100-xCrx (x=5.8, 10.75, 15.15) was studied by means of conversion electrons Mossbauer spectroscopy. The alloys were irradiated to the dose of 7.5 dpa with ions of 0.25…
Effect of He ion irradiation on three model Fe(100-x)Cr(x) alloys (x =5.8, 10.75 and 15.15) was investigated with the conversion electron M\"ossbauer spectroscopy. The study of the alloys irradiated with 25 keV ions revealed that the…
A stack of titanium foils was irradiated with 136 MeV 136Xe to study microstructure damage and phase stability of titanium upon irradiation. X- ray diffraction, scanning electron microscopy/energy dispersive spectroscopy and atomic force…
Pure Fe and model Fe-Cr alloys containing 5, 10 and 14%Cr were irradiated with Fe+ ions at a maximum energy of 2MeV to the same dose of 0.6dpa at temperatures of 300 C, 400 C and 500 C, and at dose rates corresponding to 6 x 10-4 dpa/s and…
Two sets of amorphous carbon materials prepared at different routes are irradiated with swift (145 MeV) heavy ion (Ne6+). The structural parameters like the size of ordered grains along c and a axis i.e. Lc & La, the average spacing of the…
The present work aims to study the effect of ion irradiation on structural and electrical properties and their correlation with the defects in Zn1-xMnxO type system. Zn1-xMnxO (x = 0.02, 0.04) samples have been synthesized by solid-state…