Related papers: Shear flow pumping in open microfluidic systems
Microfluidics involves the manipulation of flows at the microscale, typically requiring external power sources to generate pressure gradients. Alternatively, harnessing flows from active fluids, which are usually chaotic, has been proposed…
Nano-scale fluid transport has vast applications spanning from water desalination to biotechnology [1,2]. It is possible to pump fluids in nano-conduits using pressure gradients [3], thermal methods [4], electric [5,6] and magnetic fields…
Microfluidics, the study of fluids in microscopic channels, has led to important advances in fields as diverse as microelectronics, biotechnology and chemistry. Microfluidic research is primarily based on the use of microfluidic chips,…
Pumping fluids without an aid of an external power source are desirable in a number of applications ranging from a cooling of microelectronic circuits to Micro Total Analysis Systems (micro-TAS). Although, several microfluidic pumps exist,…
Fluid flow along microchannels can be induced by keeping opposite walls at different temperatures, and placing elongated tilted pillars inside the channel. The driving force for this fluid motion arises from the anisotropic thermophoretic…
We present a simple model for the development of shear layers between parallel flows in confining channels. Such flows are important across a wide range of topics from diffusers, nozzles and ducts to urban air flow and geophysical fluid…
Precise manipulation of fluids and objects on the micro scale is seldom a simple task, but nevertheless crucial for many applications in life sciences and chemical engineering. We present a microfluidic chip fabricated in silicon-glass,…
We develop a simulational methodology allowing for simulation of the pressure-driven flow in the pore with flat and polymer-modified walls. Our approach is based on dissipative particle dynamics and we combine earlier ideas of fluid-like…
Thermo-osmotic flows - flows generated in micro and nanofluidic systems by thermal gradients - could provide an alternative approach to harvest waste heat. However, such use would require massive thermo-osmotic flows, which are up to now…
Recent experiments have shown that when a near-hemispherical lipid vesicle attached to a solid surface is subjected to a simple shear flow it exhibits a pattern of membrane circulation much like a dipole vortex. This is in marked contrast…
The development of microfluidic devices is still hindered by the lack of robust fundamental building blocks that constitute any fluidic system. An attractive approach is optical actuation because light field interaction is contactless and…
Microchannel reactors are critical in biological plus energy-related applications and require meticulous design of hundreds-to-thousands of fluid flow channels. Such systems commonly comprise intricate space-filling microstructures to…
We show that the energy required by a turbulent flow to displace a given amount of fluid through a straight duct in a given time interval can be reduced by modulating in time the pumping power. The control strategy is hybrid: it is passive,…
With the increasing penetration of the roof-top solar PV and the rising interest in net-zero energy homes concept, there is a need of balancing the performance of intelligent controllers, their cost-effectiveness and over-all sophistication…
To facilitate the use and portability of Lab on a chip technology, it is desirable to avoid the use of bulky electronic systems for flow control. Developed self-powered microsystems typically move only small volumes of fluid performing up…
Air-permeable porous media hosts air within their pores. Upon removal from the interior of the material, these porous media have the tendency to reabsorb air from the surrounding, acting as a suction pump. Therefore, the technique used to…
A consistent description of a shear flow, the accompanied viscous heating, and the associated entropy balance is given in the framework of a deterministic dynamical system, where a multibaker dynamics drives two fields: the velocity and the…
An ion-exchange-resin-based microfluidic pump is introduced that utilizes trace amounts of ions to generate fluid flows. We show experimentally that our pump operates in almost deionized water for periods exceeding 24h and induces fluid…
This paper deals with flow-induced shape transitions of elastic capsules. The state of the art concerning both theory and experiments is briefly reviewed starting with dynamically induced small deformation of initially spherical capsules…
Most of the vibrating mechanisms of optofluidicsystems are based on local heating of membranes that in-duces liquid flow. We report here a new type of diaphragmpump in a liquid film based on the optical radiation pres-sure force. We…