Related papers: Contact effects in polymer field-effect transistor…
Contact resistances between organic semiconductors and metal electrodes have been shown to play a dominant role in electronic charge injection properties of organic field-effect transistors. These effects are more prevalent in short channel…
Contact resistances between organic semiconductors and metals can dominate the transport properties of electronic devices incorporating such materials. We report measurements of the parasitic contact resistance and the true channel…
We have studied charge injection across the metal/organic semiconductor interface in bottom-contact poly(3-hexylthiophene) (P3HT) field-effect transistors, with Au source and drain electrodes modified by self-assembled monolayers (SAMs)…
We have studied metal/organic semiconductor charge injection in poly(3-hexylthiophene) (P3HT) field-effect transistors with Pt and Au electrodes as a function of annealing in vacuum. At low impurity dopant densities, Au/P3HT contact…
Interfacial charge transfer plays an essential role in establishing the relative alignment of the metal Fermi level and the energy bands of organic semiconductors. While the details remain elusive in many systems, this charge transfer has…
Multiterminal measurements have typically been employed to examine electronic properties of strongly correlated electronic materials such as transition metal oxides without the influence of contact effects. In contrast, in this work we…
We show that infrared imaging of the charge density profile in organic field-effect transistors (FETs) can probe transport characteristics which are difficult to access by conventional contact-based measurements. Specifically, we carry out…
Transport properties of a series of poly(3-hexylthiophene) organic field effect transistors with Cr, Cu and Au source/drain electrodes were examined over a broad temperature range. The current-voltage characteristics of the injecting…
The extremely high carrier mobility and the unique band structure, make graphene very useful for field-effect transistor applications. According to several works, the primary limitation to graphene based transistor performance is not…
The contact resistance limits the down-scaling and operating range of OFETs. With the monolayer (1L) organic crystals and non-destructive metal/semiconductor interfaces, intrinsic mobility of 12.5 cm2V-1s-1 and Ohmic contact resistance of…
The modulus spectra of organic field-effect transistors (OFETs) with electrode overlap and peripheral regions have been experimentally and theoretically investigated. The complex impedance of regioregular poly(3-hexylthiophene-2,5-diyl)…
Charge injection from electrodes into doped organic films is a widespread technology used in the majority of state-of-the-art organic semiconductor devices. Although such interfaces are commonly considered to form Ohmic contacts via strong…
Advanced microelectronics in the future may require semiconducting channel materials beyond silicon. Two-dimensional (2D) semiconductors, characterized by their atomically thin thickness, hold immense promise for high-performance electronic…
We demonstrate an approach to improve poly-3-hexylthiophene field effect transistors by modifying the gold contacts with monolayer thick pentacenequinone (PQ) or naphthalene (NL). The effective contact resistance is reduced by a factor of…
Organic light emitting field effect transistors (OLEFETs) with bilayer structures have been widely studied due to their potential to integrate high-mobility organic transistors and efficient organic light emitting diodes. However, these…
A common issue in low temperature measurements of enhancement-mode metal-oxide-semiconductor (MOS) field-effect transistors (FETs) in the low electron density regime is the high contact resistance dominating the device impedance. In that…
Ultrathin polymer-graphene heterostructures are promising materials for next generation optoelectronic and photovoltaic technologies, while the influence of the polymer's structural variation on interfacial charge transfer remains unclear.…
We measure hole transport in poly(3-hexylthiophene) field effect transistors with channel lengths from 3 $\mu$m down to 200 nm, from room temperature down to 10 K. Near room temperature effective mobilities inferred from linear regime…
Although monolayer black phosphorus (BP) or phosphorene has been successfully exfoliated and its optical properties have been explored, most of electrical performance of the devices is demonstrated on few-layer phosphorene and ultra-thin BP…
Hybrid materials are crucial in photovoltaics where the overall efficiency of the heterostructure is closely related to the level of charge transfer at the interface. Here, using various metal / poly(3-hexylthiophene)(P3HT) heterostructure…