Related papers: Controlling charge injection in organic field-effe…
We have studied metal/organic semiconductor charge injection in poly(3-hexylthiophene) (P3HT) field-effect transistors with Pt and Au electrodes as a function of annealing in vacuum. At low impurity dopant densities, Au/P3HT contact…
Contact resistances often contribute significantly to the overall device resistance in organic field-effect transistors (OFETs). Understanding charge injection at the metal-organic interface is critical to optimizing OFET device…
Transport properties of a series of poly(3-hexylthiophene) organic field effect transistors with Cr, Cu and Au source/drain electrodes were examined over a broad temperature range. The current-voltage characteristics of the injecting…
Contact resistances between organic semiconductors and metal electrodes have been shown to play a dominant role in electronic charge injection properties of organic field-effect transistors. These effects are more prevalent in short channel…
We show that infrared imaging of the charge density profile in organic field-effect transistors (FETs) can probe transport characteristics which are difficult to access by conventional contact-based measurements. Specifically, we carry out…
The hole carrier field-effect mobility of hybrid molybdenum disulfide (MoS2) nanoparticles suspended in poly(3-hexylthiophene) (P3HT) thin film transistor (TFT) was found to be enhanced when it compared to P3HT-only TFTs. The improvement in…
Interfacial charge transfer plays an essential role in establishing the relative alignment of the metal Fermi level and the energy bands of organic semiconductors. While the details remain elusive in many systems, this charge transfer has…
We report charge transport measurements in nanoscale vertical pillar structures incorporating ultrathin layers of the organic semiconductor poly(3-hexylthiophene)(P3HT). P3HT layers with thickness down to 5 nm are gently top-contacted using…
We have investigated the conductance properties of C60-containing self-assembled monolayers (SAMs), which are used in organic field-effect transistors, employing a combination of molecular-dynamics simulations, semiempirical electronic…
The surface conductivity is measured by a four-probe technique for pentacene and rubrene single-crystals laminated on polarized and nearly unpolarized molecular monolayers with application of perpendicular electric fields. The polarization…
We report a detailed comparison on the role of a self-assembled monolayer (SAM) of dipolar molecules on the threshold voltage and charge carrier mobility of organic field-effect transistor (OFET) made of both amorphous and polycrystalline…
Ammonium tetrathiomolybdate (ATM) spontaneously self assembles on Au electrodes forming a hydrophilic, air stable, pH (3-11) tolerant multilayer that is stable over a reasonably large potential window. The ATM functionalized Au electrodes…
Molecular self-assembly has been extensively used for surface modification of metals and oxides for a variety of applications, including molecular and organic electronics. One of the goals of this research is to learn how the electronic…
Contact resistances between organic semiconductors and metals can dominate the transport properties of electronic devices incorporating such materials. We report measurements of the parasitic contact resistance and the true channel…
Charge-carrier transport in a paradigmatic semicrystalline polymer semiconductor (P3HT) is important for both fundamental understanding and applications. In samples with enhanced structural disorder due to ad-hoc point defects, the mobility…
Ultrathin polymer-graphene heterostructures are promising materials for next generation optoelectronic and photovoltaic technologies, while the influence of the polymer's structural variation on interfacial charge transfer remains unclear.…
Metal/semiconductor interfaces govern the operation of semiconductor devices through the formation of charge injection barriers that can be controlled by tuning the metal work function. However, the controlling ability is typically limited…
Molecular-scale diodes made from self-assembled monolayers (SAMs) could complement silicon-based technologies with smaller, cheaper, and more versatile devices. However, advancement of this emerging technology is limited by insufficient…
We carry out a comprehensive theoretical and experimental study of charge injection in Poly(3-hexylthiophene) (P3HT) to determine the most likely scenario for metal-insulator transition in this system. We calculate the optical absorption…
We demonstrate an approach to improve poly-3-hexylthiophene field effect transistors by modifying the gold contacts with monolayer thick pentacenequinone (PQ) or naphthalene (NL). The effective contact resistance is reduced by a factor of…