Related papers: Highly oriented VO2 thin films prepared by sol-gel…
Pulsed laser deposition from a Nd:YAG laser was employed in production of hundreds of nanometer thick quasicrystalline Ti-Zr-Ni films on glass substrate. The influence of deposition temperature Ts on the structure, morphology and…
This investigation deals with the effect of annealing temperature on the structural, topographical and optical properties of Zinc Oxide thin films prepared by sol gel method. The structural properties were studied using X-ray diffraction…
A Hybrid Physical-Chemical Vapour Deposition (HPCVD) system consisting of separately controlled Mg-source heater and substrate heater is used to grow MgB2 thin films and thick films at various temperatures. We are able to grow…
The surface structure of SrTiO3(001) thin films homoepitaxially grown by PLD in step-flow mode was characterized using low temperature STM. It was found that one-dimensional (1D) TiOx-based nanostructures were formed on the thin film…
In oxide epitaxy, the growth temperature and background oxygen partial pressure are considered as the most critical factors that control the phase stability of an oxide thin film. Here, we report an unusual case wherein diffusion of oxygen…
We have studied structural and transport properties of epitaxial NaxCoO2 thin films on (0001) sapphire substrate prepared by topotaxially converting an epitaxial Co3O4 film to NaxCoO2 with annealing in Na vapor. The films are c axis…
Nanostructured TiO2 thin films were prepared by pulsed laser deposition (PLD) on indium doped tin oxide (ITO) substrates. Results from X-ray photoelectron spectroscopy (XPS) show that Ti 2p core level peaks shift toward the lower binding…
Here we report mid infrared (mid-IR) photothermal response of multi layer MoS2 thin film grown on crystalline (p-type silicon and c-axis oriented single crystal sapphire) and amorphous substrates (Si/SiO2 and Si/SiN) by pulsed laser…
$V_2O_3$ has long been studied as a prototypical strongly correlated material. The difficulty in obtaining clean, well ordered surfaces, however, hindered the use of surface sensitive techniques to study its electronic structure. Here we…
Using isothermal and temperature-dependent electrical measurements, we investigated the resistive switching mechanism of amorphous titanium oxide thin films deposited by a plasma-enhanced atomic layer deposition method between two aluminum…
We report a novel method of growing strongly-disordered superconducting titanium nitride (TiN) thin films by reactive electron-beam deposition. The normal state sheet resistance and superconducting critical temperature (Tc) can be tuned by…
We deposited Ag_2O films in PLD system on glass substrate for a fixed partial oxygen gas pressure (70 mili Torr) with the variation of laser energy from 75 to 215 mJ/Pulse. The XRD patterns confirm that the films have well crystallinity and…
Tin (IV) oxide (SnO2) sols have been synthesized from SnCl2.2H2O precursor solution by applying two different processing conditions. The prepared sols were then deposited on UV-Ozone treated quartz and soda lime glass (SLG) substrates by…
Yttrium orthosilicate (Y2SiO5 - YSO) is one of the most promising crystals to host rare-earth (RE) ions for quantum technologies applications. In this matrix, they indeed exhibit narrow optical and spin linewidths that can be exploited to…
VO2 is a strongly correlated material, which undergoes a reversible metal insulator transition (MIT) coupled to a structural phase transition upon heating (T= 67{\deg} C). Since its discovery the nature of the insulating state has long been…
Epitaxial titanium diboride thin films have been deposited on sapphire substrates by Pulsed Laser Ablation technique. Structural properties of the films have been studied during the growth by Reflection High Energy Electron Diffraction…
Sol-gel spin coating technique was employed to synthesize CuO thin films at 1500 rpm, 2200 rpm and 2400 rpm for 30 seconds, and subsequently annealed at 150-550{\deg}C for 1 hour. Multi-layered CuO thin films with 3 and 5 layers were…
In this work, we characterized gadolinium oxide films deposited on silicon by high pressure sputtering with a two-step process: first, we sputtered metallic gadolinium in an argon atmosphere and then, we performed an in-situ plasma…
For a detailed study on the semiconductor to metal transition (SMT) in ZnO thin films doped with Al in the concentration range from 0.02 to 2%, we grew these films on (0001) sapphire substrates using sequential pulsed laser deposition. It…
Results of X-ray diffraction experiments on solid oxygen at low temperature and at pressures up to 10 GPa are presented.A careful sample preparation and annealing around 240 K allowed to obtain very good diffraction patterns in the…