Related papers: Studies on Neon irradiated amorphous carbon using …
Amorphous, glass, and glass-ceramic materials practically always include a significant number (more than eight) of crystalline phases, with the contents of the latter ranging from a few wt.% to several hundredths or tenths of wt.%. The…
An algorithm is developed for structure identification of amorphous carbonaceous nanomaterials with a joint x-ray and neutron diffraction data analysis, using the data on the chemical composition of the sample from other diagnostics. The…
AMORPH utilizes a new Bayesian statistical approach to interpreting X-ray diffraction results of samples with both crystalline and amorphous components. AMORPH fits X-ray diffraction patterns with a mixture of narrow and wide components,…
A method is suggested for estimation of structural properties of amorphous fullerene and its derivatives produced by vacuum annealing. The method is based on the fitting of the neutron or x-ray powder diffraction patterns for scattering…
While crystalline two-dimensional materials have become an experimental reality during the past few years, an amorphous 2-D material has not been reported before. Here, using electron irradiation we create an sp2-hybridized one-atom-thick…
Nanocrystalline metals are promising radiation tolerant materials due to their large interfacial volume fraction, but irradiation-induced grain growth can eventually degrade any improvement in radiation tolerance. Therefore, methods to…
Amorphous materials exhibit various characteristics that are not featured by crystals and can sometimes be tuned by their degree of disorder (DOD). Here, we report results on the mechanical properties of monolayer amorphous carbon (MAC) and…
We investigate experimentally the diffraction of fast atoms of noble gas on a LiF(100) crystal oriented along the [100] and [110] directions. The wavelengths are so short that the observed quantum features are qualitatively described by…
X-ray diffraction was demonstrated from shock-compressed polycrystalline metal on nanosecond time scales. Laser ablation was used to induce shock waves in polycrystalline foils of Be, 25 to 125 microns thick. A second laser pulse was used…
Bulk amorphous materials have been studied extensively and are widely used, yet their atomic arrangement remains an open issue. Although they are generally believed to be Zachariasen continuous random networks, recent experimental evidence…
Dynamically compressed materials in longitudinal waves are described by two physical models: hydrostatic pressure, with equal, normal, principal stresses or material uniaxially strained in the wave propagation direction. These models are…
We investigate the crystallization of amorphous arsenic-selenium alloys with 0%, 0.5%, 2%, 6%, 10%, and 19% arsenic by atomic concentration using synchrotron X-ray absorption spectroscopy. We identify crystalline order using the extended…
A method for estimating the relative content of crystalline phases of a multiphase sample, based on probabilistic analysis of the intensities of the diffraction pattern reflexes, has been developed. The method is based on the introduction…
Systematic studies of the gradual fabrication by means of carbon ion-implantation of high-quality 6H-SiC layers on silicon surfaces have been carried out. The fluence of carbon ions varied from 5*10^15 cm-2 to 10^17 cm-2. Results of…
Ultra-high dose rate radiation therapy (FLASH) based on proton irradiation is of major interest for cancer treatments but creates new challenges for dose monitoring. Amorphous hydrogenated silicon is known to be one of the most…
The diffraction peaks of Zircaloy-2 and Zr-2.5%Nb alloys at various deformations are found to be asymmetric in nature. In order to characterize the microstructure from these asymmetric peaks of these deformed alloys, X-Ray Diffraction Line…
Amorphous silicon (a-Si) models are analyzed for structural, electronic and vibrational characteristics. Several models of various sizes have been computationally fabricated for this analysis. It is shown that a recently developed…
Low-energy ion beam modification was proposed to create graphene on the top of the insulated diamond-like carbon films. In such low-temperature fabrication process the surface of the amorphous carbon could crystallize to graphene as a…
How an otherwise inert carbon-oxygen white dwarf can be made to explode as a Type Ia supernova remains unknown. A promising test of theoretical models is to constrain the distribution of material that is left unburned, in particular of…
The synthesis of wafer-scale two-dimensional amorphous carbon monolayers has been recently demonstrated. This material presents useful properties when integrated as coating of metals, semiconductors or magnetic materials, such as enabling…