Related papers: Ion Beam Synthesis of embedded SiC
Understanding irradiation-induced strain in silicon carbide (SiC) is essential for designing radiation-tolerant ceramic materials. However, conventional methods often fail to resolve nanoscale strain gradients, especially in polycrystalline…
To cope with environments with high levels of radiation, non-silicon semiconductors such as silicon carbide detectors are being proposed for instrumentation. 4H-SiC diodes for radiation detection have been fabricated in the IMB-CNM Clean…
Si nanopillars of less than 50 nm diameter have been irradiated in a helium ion microscope with a focused Ne$^+$ beam. The morphological changes due to ion beam irradiation at room temperature and elevated temperatures have been studied…
Silicon films doped with Er and O were prepared by techniques of physical vapor deposition on crystalline silicon, ion beam mixing and oxygen incorporation through Ar+ and O2+ implantation, and thermal annealing. Processing steps were…
Nearly two-orders of magnitude increase in room-temperature band-to-band (1.067 eV) infrared emission from crystalline silicon, coated with erbium-doped sol-gel films, have been achieved. Phonon-assisted band-to-band emission from coated…
The chemical changes of Ti/Er/n-Si(100) stacks evaporated in high vacuum and grown ex situ by rapid thermal annealing were scrutinized. The emphasis was laid on the evolution with the annealing temperature of (i) the Er-Si solid-state…
The process of liquid silicon infiltration is investigated for channels with radii from $0.25$ to $0.75$ [mm] drilled in compact carbon preforms. The advantage of this setup is that the study of the phenomenon results to be simplified. For…
We report the results of experimental studies related to implantation of thorium ions into thin silicon dioxide by pulsed plasma fluxes expansion. Thorium ions were generated by laser ablation from a metal target, and the ionic component of…
Titanium silicide is a key contact material in advanced three-dimensional semiconductor device architectures. Here, we examine the formation of ultrathin Ti-silicide on Si(100) using a combination of non-destructive in-situ and ex-situ ion…
In ion cancer therapy, high-intensity ion beams are used to treat tumors by taking advantage of the Bragg-Peak. Typical ion therapy centers use particle rates up to $10^{10}$ ions/second for treatment. On the other hand, such intensities…
The formation of grains in the interstellar medium, i.e., at low temperature, has been proposed as a possibility to solve the lifetime problem of cosmic dust. This process lacks a firm experimental basis, which is the goal of this study. We…
It has been shown that many of the phenomena related to the formation of "tails" in the low-concentration region of ion-implanted impurity distribution are due to the anomalous diffusion of nonequilibrium impurity interstitials. These…
This paper reports on the fabrication and characterization of a high purity monocrystalline diamond detector with buried electrodes realized by the selective damage induced by a focused 6 MeV carbon ion beam scanned over a pattern defined…
The ability to integrate carbon nanotubes, especially single-walled carbon nanotubes, seamlessly onto silicon would expand the range of applications considerably. Though direct integration using chemical vapor deposition is the simplest…
We present the design, fabrication, and characterization of high quality factor and small mode volume planar photonic crystal cavities from cubic (3C) thin films (thickness ~ 200 nm) of silicon carbide (SiC) grown epitaxially on a silicon…
Silicon, despite its abundance and high energy density, remains underexplored as a carbon-free fuel, with limited data available on its combustion characteristics. In this work, the combustion behaviour of silicon particles is examined…
Isotopically enriched silicon (Si) can greatly enhance qubit coherence times by minimizing naturally occurring $^{29}$Si which has a non-zero nuclear spin. Ultra-high fluence $^{28}$Si ion implantation of bulk natural Si substrates was…
In this work we use LEEM, XPEEM and XPS to study how the excess Si at the graphene-vacuum interface reorders itself at high temperatures. We show that silicon deposited at room temperature onto multilayer graphene films grown on the…
The Ion Beam Induced Charge (IBIC) technique is widely used to characterize the electronic properties of semiconductor materials and devices. Its main advantage over other charge collection microscopies stems in the use of MeV ion probes,…
The Hydrogenated Diamond Like Carbon (HDLC) thin films are deposited on Silicon substrate at room temperature using asymmetric capacitively coupled RF plasma with varying flow rates of methane. These films are undergone annealing at high…