Related papers: Ion beam sputtering method for progressive reducti…
Amorphous solids can flow over very long periods of time. Solid flow can also be artificially enhanced by creating defects, as by Ion Beam Sputtering (IBS) in which collimated ions with energies in the 0.1 to 10 keV range impact a solid…
We report a reproducible technique for the fabrication of sharp superconducting Nb tips for scanning tunneling microscopy (STM) and scanning tunneling spectroscopy. Sections of Nb wire with 250 $\mu$m diameter are dry etched in an SF$_6$…
Two semi-analytical approaches to solve the problem of light scattering on nanowire antennas are developed and compared. The derivation is based on the exact solution of the plane wave scattering problem in case of an infinite cylinder. The…
The fabrication of more and more miniaturized electronic and photonic devices relies on new, ingenious methods for the fabrication of spatially controlled nanostructures. Examples are electronic devices based on semiconducting nanowires and…
We present a new method for nanoscale atom lithography. We propose the use of a supersonic atomic beam, which provides an extremely high-brightness and cold source of fast atoms. The atoms are to be focused onto a substrate using a thin…
Hybrid superconductor/semiconductor devices play a crucial role in advancing quantum science and technology by merging the properties of superconductors and semiconductors. To operate these devices at high temperature, Niobium could…
Ultrathin GaN nanowires (NWs) are attractive to maximize surface effects and as building block in high-frequency transistors. Here, we introduce a facile route for the top-down fabrication of ordered arrays of GaN NWs with aspect ratios…
A R&D program is developed at the ALTO facility to provide new beams of exotic neutron-rich nuclei, as intense as possible. In the framework of European projects, it has been shown that the use of refractory targets with nanometric…
A powerful technique is introduced for simulating mechanical and electromechanical properties of one-dimensional nanostructures under arbitrary combinations of bending, twisting, and stretching. The technique is based on a novel control of…
Nanofabrication research pursues the miniaturization of patterned feature size. In the current state of the art, micron scale areas can be patterned with features down to ~ 30 nm pitch using electron beam lithography. Our work demonstrates…
We report a robust fabrication method for patterning free-standing Pt nanowires for the use as thermal anemometry probes for small-scale turbulence measurements. Using e-beam lithography, high aspect ratio Pt nanowires (~300 nm width, ~70…
Small-angle scattering (SAS) is a key experimental technique for analyzing nano-scale structures in various materials.In SAS data analysis, selecting an appropriate mathematical model for the scattering intensity is critical, as it…
Small-angle neutron scattering (SANS) is a powerful technique for probing the nanoscale structure of materials. However, the fundamental limitations of neutron flux pose significant challenges for rapid, high-fidelity data acquisition…
Pulsed-laser dry printing of noble-metal microrings with a tunable internal porous structure, which can be revealed via an ion-beam etching post-procedure, was demonstrated. Abundance and average size of the pores inside the microrings were…
Nanomaterials often undergo unusual mechanical deformations compared to their bulk counterparts when irradiated with ion-beams. This study visualizes and investigates some of the unusual interactions that can occur in nanomaterials during…
A new process for fabricating NiO exchange bias layers has been developed. The process involves the direct ion beam sputtering (IBS) of a NiO target. The process is simpler than other deposition techniques for producing NiO buffer layers,…
The ability to engineer the thermal conductivity of materials allows us to control the flow of heat and derive novel functionalities such as thermal rectification, thermal switching, and thermal cloaking. While this could be achieved by…
In present study we exploited Langmuir technique to produce self-assembled arrays composed of monodisperse iron oxide nanoparticles 10 nm and 20 nm in diameter and of their binary mixture. A combination of in-situ X-ray reflectometry and…
A cost effectively method to fabricate nanopores in silicon by only using the conventional wet-etching technique is developed in this research. The main concept of the proposed method is a two-step etching process, including a premier…
Selenium has attracted intensive attention as a promising material candidate for future optoelectronic applications. However, selenium has a strong tendency to grow into nanowire forms due to its anisotropic atomic structure, which has…