Related papers: Ageing Effect of Sb2Te3 thin films
Specific heat of polycrystalline BaTiO3 thin films on the fused quartz substrate was measured by ac-hot probe method. Phase transition temperature, excess entropy and spontaneous polarization were determined as a function of film thickness…
The temperature dependence of the Seebeck coefficient of homoepitaxial metal organic vapor phase (MOVPE) grown, silicon doped $\beta$-Ga$_2$O$_3$ thin films was measured relative to aluminum. For room temperature we found the relative…
We report the results of the X-ray diffraction study of B2O3 glass in the pressure interval up to 10 GPa in the 300-700 K temperature range, the results of in-situ volumetric measurements of the glass at pressures up to 9 GPa at room…
Exploring new topological materials with large topological nontrivial bandgaps and simple composition is attractive for both theoretical investigation and experimental realization. Recently alpha tin ({\alpha}-Sn) has been predicted to be…
A series of electron-doped cuprate La(2-x)CexCuO4 thin films with different thicknesses have been fabricated and their annealing time are adjusted carefully to ensure the highest superconducting transition temperature. The transport…
Strongly anchored free-standing smectic films usually present a stepwise reduction of the number of layers when the temperature is raised above the smectic-isotropic bulk transition temperature. Here, we demonstrate that a field-induced…
We present a study of the synthesis of epitaxial V$_2$O$_3$ films on $c$-plane Al$_2$O$_3$ substrates by reactive dc-magnetron sputtering. The results reveal a temperature window, at substantially lower values than previously reported,…
We report on sexithiophene films, about 150nm thick, grown by thermal evaporation on single crystal oxides and, as comparison, on Si/SiO2. By heating the entire deposition chamber at 100 C we obtain standing-up oriented molecules all over…
Highly textured chalcogenide films have recently gained significant interest for phase-change memory applications. Several reports have highlighted that programming efficiency improves in devices featuring superlattice stacks, such as…
We have explored the influence of deposition pressure and temperature on the growth of BiFeO3 thin films by pulsed laser deposition onto (001)-oriented SrTiO3 substrates. Single-phase BiFeO3 films are obtained in a region close to 10-2 mbar…
We discuss the origin of the temperature dependence of resistivity observed in highly oriented LaNiO_3 thin films (of thickness d) grown on SrTiO_3 substrate by a pulsed laser deposition technique. All the experimental data are found to…
Structural and electronic properties of amorphous and single-phase polycrystalline films of gamma- and kappa-In2Se3 have been measured. The stable gamma phase nucleates homogeneously in the film bulk and has a high resistivity, while the…
Metal deposition with cryogenic cooling is widely utilized in the condensed matter community for producing ultra-thin epitaxial superconducting layers on semiconductors. However, a drawback arises when these films return to room…
Thin films of superconducting V$_3$Si were prepared by means of RF sputtering from a compound V$_3$Si target at room temperature onto sapphire and oxide-coated silicon wafers, followed by rapid thermal processing under secondary vacuum. The…
The nucleation mechanisms during solution deposition of organic semiconductor thin films determine the grain morphology and may influence the crystalline packing in some cases. Here, in-situ optical spectromicroscopy in reflection mode is…
The structure of titanium films on \alpha - Al2O3(0001) surfaces at room temperature was investigated through in situ reflection high energy electron diffraction (RHEED). The \alpha-phase of titanium was observed to grow with the Ti(0001)…
We have investigated the thermodynamic and kinetic barriers involved in the synthesis of MgB2 films. This work refines our initial conjectures predicting optimal MgB2 thin film growth conditions as a consequence of the unusually large…
We report the observation that thermoelectric thin-films of La-doped SrTiO3 grown on SrTiO3 substrates yield anomalously high values of thermopower to give extraordinary values of power factor at 300K. Thin-films of Sr0.98La0.02TiO3, grown…
We report the effect of varying cobalt thickness on the temperature-dependent time decay of the electrical resistance of Co/Sb multilayer samples. We find that for a given temperature, a five fold change in the Co thickness produces a 100…
In this work we investigate influence of substrate temperature on the surface morphology for substrate coverage below one monolayer. The model of film growth is based on random deposition enriched by limited surface diffusion. Also…