Related papers: High critical current densities in superconducting…
The in situ annealing conditions of pulsed laser deposited MgB2 films were studied. The precursor films were deposited at 250 C from a stoichiometric MgB2 target in a 120mTorr Ar atmosphere. The films were then in situ annealed at a…
We have successfully prepared the MgB2 superconducting bulk and powdered materials by the method of combustion synthesis. The starting materials used in this study were powders of Mg and B. X-ray powder diffraction pattern was well assigned…
High quality MgB2 thin films have been obtained by pulsed laser deposition both on MgO and on Al2O3 substrates using different methods. In the standard two-step procedure, an amorphous precursor layer is deposited at room temperature…
High quality, ultrathin, superconducting films are required for advanced devices such as hot-electron bolometers, superconducting nanowire single photon detectors, and quantum applications. Using Hybrid Physical-Chemical Vapor Deposition…
The MgB2 coated superconducting tapes have been fabricated on textured Cu (0 0 1) and polycrystalline Hastelloy tapes using coated conductor technique, which has been developed for the second generation high temperature superconducting…
A complexing molecule electrodeposition technique has been developed for the deposition of low cost, lightweight MgB2 films, for the first time. Different deposition parameters such as bath composition, deposition potential, current…
Highly smooth and c-axis oriented superconducting MgB2 thin films were prepared by pulsed laser deposition (PLD) with off-axis geometry. The films were deposited on Al2O3-C substrates perpendicularly aligned to a stoichiometric MgB2 target…
High superconducting transition temperature is favorable for the applications of superconductors. Some cuprate superconductors have the transition temperatures above 100 K, such as the Hg- or Tl-based 1223 and 1234 phases, but many of them…
A thin film technology compatible with multilayer device fabrication is critical for exploring the potential of the 39-K superconductor magnesium diboride for superconducting electronics. Using a Hybrid Physical-Chemical Vapor Deposition…
This review paper illustrates the main normal and superconducting state properties of magnesium diboride, a material known since early 1950's, but recently discovered to be superconductive at a remarkably high critical temperature Tc=40K…
Magnesium diboride (MgB2) thin films are a potential alternative to low-temperature superconductors (LTS) due to a higher critical temperature (Tc) of approximately 39 K. The reactive evaporation deposition technique also affords relatively…
A Hybrid Physical-Chemical Vapour Deposition (HPCVD) system consisting of separately controlled Mg-source heater and substrate heater is used to grow MgB2 thin films and thick films at various temperatures. We are able to grow…
We have performed a comparative study of two thin films of magnesium diboride (MgB2) grown by different techniques. The critical current density at different temperatures and magnetic fields was evaluated from magnetisation curves, the…
We investigate the influence of carbon-ion irradiation on the superconducting critical properties of MgB$_2$ thin films. MgB$_2$ films of two thicknesses viz. 400 nm (MB400nm) and 800 nm (MB800nm) were irradiated by 350 keV C ions having a…
The superconducting and critical current properties of thin films of NiBi3 formed on the surface of carbon microfibers and sapphire substrates are reported. The NiBi3 coated carbon microfibers were prepared by reacting 7 {\mu}m diameter…
The effect of water exposure on MgB2 is studied by submerging an 800 nm thick MgB2 film into deionized water at room temperature for 1 hour, 4 hours, 10 hours, and 15 hours, and by analyzing the resulting material using scanning electron…
Progress in superconducting device and detector technologies over the past decade have realized practical applications in quantum computers, detectors for far-infrared telescopes, and optical communications. Superconducting thin film…
We report the fabrication of MgB2 with bulk superconducting properties by conventional solid state methods at temperatures as low as 550 C. Mg deficiencies of the type Mg1-xB2 were tested. Tc was found to decrease by about 1K at large x,…
MgB2 thin films were cold-grown on sapphire substrates by pulsed laser deposition (PLD), followed by post-annealing in mixed, reducing gas, Mg-rich, Zr gettered, environments. The films had Tcs in the range 29 K to 34 K, Jcs (20K, H=0) in…
We report the growth of potassium-doped BaFe2As2 thin films, where the major charge carriers are holes, on Al2O3 (0001) and LaAlO3 (001) substrates by using an ex-situ pulsed laser deposition technique. The measured Tc's are 40 and 39 K for…