Related papers: High critical current densities in superconducting…
We performed magneto-optical (MO) measurements on FeTe$_{0.5}$Se$_{0.5}$ thin films grown on LaAlO$_3$ (LAO) and Yttria-stabilized zirconia (YSZ) single-crystalline substrates. These thin films show superconducting transition temperature,…
Current-voltage characteristics of top seeded melt-textured YBa2Cu3O7-d are presented. The samples were cut out of centimetric monoliths. Films characteristics were also measured on microbridges patterned on thin films grown by dc…
We have studied thermodynamics of the Mg-B system with the modeling technique CALPHAD using a computerized optimization procedure. Temperature-composition, pressure-composition, and pressure-temperature phase diagrams under different…
Scanning transmission x-ray microscopy has been used to image electric currents in superconducting films at temperatures down to 20 K. The magnetic stray field of supercurrents in a thin YBaCuO film is mapped into a soft-magnetic coating of…
We report on the thickness dependence of the superconducting characteristics including critical current Ic, critical current density Jc, transition temperature Tc, irreversibility field Hirr, bulk pinning force plot Fp(H), and the normal…
We report on the synthesis and characterization of nanocrystalline delta-MoN by crystallization of amorphous thin films grown on (100) Si by reactive sputtering at room temperature. Films with chemical composition MoN were grown using a…
In this investigation we report the determination of the critical current density $J_c$ flowing in a $\mathrm{Y}\mathrm{Ba}_2\mathrm{Cu}_3\mathrm{O}_{7-\delta}$ superconducting thin film. Estimation of $J_c$ was carried out by an inductive…
The thermal stability of MgB2 has been studied experimentally to determine the role of thermodynamic and kinetic barriers in the decomposition process. The MgB2 decomposition rate approaches one monolayer per second at 650 C and has an…
Our Rutherford backscattering spectrometry (RBS) study has found that concentrations up to 7 atomic percent of Rb and Cs can be introduced to a depth of ~700 A in MgB2 thin films by annealing in quartz ampoules containing elemental alkali…
LaFeAsO1-xFx thin films were deposited successfully on (001)-oriented LaAlO3 and MgO substrates from stoichiometric LaFeAsO1-xFx polycrystalline targets with fluorine concentrations up to x = 0.25 by PLD. Room temperature deposition and…
We report on magnetron deposition of thin superconducting rhenium films on sapphire substrates. During the deposition, substrates were held at ambient temperature. Critical temperature of the films is Tc~3.6 K. Films have polycrystalline…
We report on the influence of the chemical composition on the electronic properties of molybdenum oxynitrides thin films grown by reactive sputtering on Si (100) substrates at room temperature. The partial pressure of Ar was fixed at 90 %,…
We report molecular beam epitaxy synthesis of vacancy-ordered rocksalt NbO thin films which display superconductivity. A comparative study of substrates identifies Al$_2$O$_3$ (0001) as the optimal platform for realizing high-quality,…
We have fabricated high-quality FeSe1-x superconducting films with a bulk Tc of 11-12 K on different substrates, Al2O3(0001), SrTiO3(100), MgO(100), and LaAlO3(100), by using a pulsed laser deposition technique. All the films were grown at…
The temperature and field dependence of harmonics in voltage $V_n=V'_n-iV"_n$ using the screening technique have been measured for $\mathrm{Y}\mathrm{Ba}_{2}\mathrm{Cu}_3\mathrm{O}_{7-\delta}$ superconducting thin films. Using the Sun model…
Epitaxial NbO2 (110) films, 20 nm thick, were grown by pulsed laser deposition on Al2O3 (0001) substrates. The Ar/O2 total pressure during growth was varied to demonstrate the gradual transformation between NbO2 and Nb2O5 phases, which was…
Materials of the Y-Ba-Cu-O (melt-textured YBa2Cu3O7-d-based materials or MT-YBCO) and Mg-B-O (MgB2-based materials) systems with high superconducting performance, which can be attained due to the formation of regularly distributed…
Magnetisation and magnetoresistance measurements have been carried out on superconducting Ba1-xKxFe2As2 samples with x=0.40 and 0.50. From low field magnetization data carried out at different temperatures below TC, HC1 has been extracted.…
The powder in tube method has been used to fabricate Ag and Cu clad MgB2 wires using an in-situ reaction method. The effects of short time sintering on the critical current densities of Ag and Cu clad MgB2 wires were studied. All the…
The microstructure of the MgB2 superconductor sintered at high temperature under a high pressure of about 3 GPa was investigated by using a high-resolution transmission electron microscope (HRTEM). The TEM images did not show any pores in…