Related papers: Beryllium nitride thin film grown by reactive lase…
Hexagonal boron nitride (h-BN) is a layered two-dimensional material with properties that make it promising as a dielectric in various applications. We report the growth of h-BN films on Ni foils from elemental B and N using molecular beam…
Zirconium nitride (ZrN) is a refractory material with good mechanical and thermal properties. It is therefore a good candidate for hard surface treatment at high temperature. In this work, we report the growth and characterization of ZrN by…
Aluminum nitride (AlN) is an emerging material for integrated quantum photonics with its excellent linear and nonlinear optical properties. In particular, its second-order nonlinear susceptibility $\chi^{(2)}$ allows single-photon…
Tantalum nitride thin films have been grown by in situ nitrogen implantation of metallic tantalum at room temperature over the energy range of 0.5-5keV. X-ray photoelectron spectroscopy (XPS) and Factor Analysis (FA) have been used to…
The thickness and interfacial geometry of hexagonal boron nitride (hBN) films grown by chemical vapor deposition on polycrystalline nickel foils is studied using low-energy electron microscopy (LEEM). The reflectivity of the electrons,…
Pulsed laser deposition from a Nd:YAG laser was employed in production of hundreds of nanometer thick quasicrystalline Ti-Zr-Ni films on glass substrate. The influence of deposition temperature Ts on the structure, morphology and…
CoFe2O4 thin films (5 nm and 20 nm thick) were grown by oxygen assisted molecular beam epitaxy on Pt(111) at 523~K and subsequently annealed at 773 K in vacuum or oxygen. They were characterized in-situ using Auger Electron Spectroscopy,…
Here we demonstrate the controlled growth of Bi(110) and Bi(111) films on an (insulating) $\alpha$-Al$_2$O$_3$(0001) substrate by surface X-ray diffraction and X-ray reflectivity using synchrotron radiation. At temperatures as low as 40 K,…
The present work reports the study of the optimized processing conditions of Bi0.9La0.1Fe0.9Mn0.1O3 thin films, grown by RF sputtering on platinum metalized silicon substrates. The combination of deposition at relatively low substrate…
This work reports on the fabrication of microbump structures on Ni films by single-pulse, localized laser irradiation. Conditions for the reproducible formation of such microstructures have been identified in terms of laser-irradiation and…
Ni thin films grown by thermal evaporation and sputtering under different deposition conditions are characterized for structural and morphological properties using X-ray diffraction (XRD) and atomic force microscopy (AFM) techniques. XRD…
Boron nitride (BN) is today considered as one of the most promising materials for many novel applications including bright single photon emission, deep UV opto-electronics, small sized solid-state neutron detector, and high-performance…
(111)NiO epitaxial layers are grown on c-sapphire substrates by pulsed laser deposition (PLD) technique. Structural and morphological properties of the films are studied using in-plane as well as out-of-plane high resolution X-ray…
High quality ZnO thin films were gown using the pulsed laser deposition technique on (0001) Al$_2$O$_3$ substrates in an oxidizing atmosphere, using a Zn metallic target. We varied the growth conditions such as the deposition temperature…
Al2O3 thin films have been deposited at substrate temperatures between 500{\deg}C to 600{\deg}C by reactive magnetron sputtering using an additional arbitrary substrate bias to tailor the energy distribution of the incident ions. The films…
We report a novel method of growing strongly-disordered superconducting titanium nitride (TiN) thin films by reactive electron-beam deposition. The normal state sheet resistance and superconducting critical temperature (Tc) can be tuned by…
Epitaxial titanium diboride thin films have been deposited on sapphire substrates by Pulsed Laser Ablation technique. Structural properties of the films have been studied during the growth by Reflection High Energy Electron Diffraction…
Nanocrystals of indium oxide (In$_2$O$_3$) with sizes below 10 nm were prepared in alumina matrixes by using a co-pulverization method. The used substrates such as borosilicate glasses or (100) silicon as well as the substrate temperatures…
Titanium nitride is a material of interest for many superconducting devices such as nanowire microwave resonators and photon detectors. Thus, controlling the growth of TiN thin films with desirable properties is of high importance. In…
Chemical vapor deposition-based growth techniques allow flexible design of CMOS-compatible materials. Here, we report the deuterated silicon-rich nitride films grown using plasma-enhanced chemical vapor deposition. The linear and nonlinear…