Related papers: An Optical Reflector System for the CANGAROO-II Te…

In order to increase the corrected field of view of an adaptive optics (AO) system, several deformable mirrors (DM) have to be placed in the conjugate planes of the dominant turbulent layers (multi-conjugate adaptive optics, MCAO [Beckers…

We describe a device (adapter) for off-axis guiding and photometric calibration of wide-angle spectrographs operating in the prime focus of the 6-m telescope of the Special Astrophysical Observatory of the Russian Academy of Sciences. To…

MagAO-X is the extreme coronagraphic adaptive optics (AO) instrument for the 6.5-meter Magellan Clay telescope and is currently undergoing a comprehensive batch of upgrades. One innovation that the instrument features is a deformable mirror…

The performance of an adaptive optics (AO) system on a 100m diameter ground based telescope working in the visible range of the spectrum is computed using an analytical approach. The target Strehl ratio of 60% is achieved at 0.5um with a…

We discuss a new technology that promises large inexpensive mirrors. We argue that it should be possible to tilt a rotating viscous liquid by perhaps as much as a few tens of degrees. The tilted liquid parabolic surface is used as the…

The Astro2020 decadal survey recommended an infrared, optical, ultra-violet (IR/O/UV) telescope with a $\sim$6~m inscribed diameter and equipped with a coronagraph instrument to directly image exoEarths in the habitable zone of their host…

It is shown that in polar geometry and normal incidence the 2x2 matrix technique - as discussed in detail in a preceeding paper [Phys. Rev. B 65, 144448 (2002)] - accounts correctly for multiple reflections and optical interferences, and…

Optics for future X-ray telescopes will be characterized by very large aperture and focal length, and will be made of lightweight materials like glass or plastic in order to keep the total mass within acceptable limits. Optics based on thin…

The Prime Focus Spectrograph (PFS) is a new optical/near-infrared multi-fiber spectrograph designed for the prime focus of the 8.2m Subaru telescope. The metrology camera system of PFS serves as the optical encoder of the COBRA fiber motors…

Adaptive Optics projects at Subaru Telescope span a wide field of capabilities ranging from ground-layer adaptive optics (GLAO) providing partial correction over a 20 arcmin FOV to extreme adaptive optics (ExAO) for exoplanet imaging. We…

The reflectance of single crystal LaSrGaO4 has been measured from approx 50 to 40000 cm^-1 along the "a" and "c" axis. The optical properties have been calculated from a Kramers-Kronig analysis of the reflectance for both polarizations. The…

High precision astrometry aims at source position determination to a very small fraction of the diffraction image size, in high SNR regime. One of the key limitations to such goal is the optical response variation of the telescope over a…

The Magellan Adaptive Secondary AO system, scheduled for first light in the fall of 2011, will be able to simultaneously perform diffraction limited AO science in both the mid-IR, using the BLINC/MIRAC4 10\{mu}m camera, and in the visible…

We have developed a conceptually new type of ellipsometry which allows the determination of the complex refractive index by simultaneously measuring the unpolarized normal-incidence reflectivity relative to the vacuum and to another…

In order to enable high quality lens designs using calcium fluoride (CaF2) and Heraeus Infrasil 301 (Infrasil) for cryogenic operating temperatures, we have measured the absolute refractive index of these two materials as a function of both…

We report the first use of Michelson interferometry on the Keck I telescope for diffraction-limited imaging in the near infrared JHK and L bands. By using an aperture mask located close to the f/25 secondary, the 10 m Keck primary mirror…

For the current generation of Imaging Atmospheric Cherenkov Telescopes (IACTs), with their large mirrors and their cameras with fine segmentation of photodetectors, the focusing capability is a relevant issue. The optical system of an IACT…

The surface quality of replicated CFRP mirrors is ideally expected to be as good as the mandrel from which they are manufactured. In practice, a number of factors produce surface imperfections in the final mirrors at different scales. To…

A stable optical resonator has been built using a 30 micrometer-wide, metal-coated microcantilever as one mirror. The second mirror was a 12.7 mm-diameter concave dielectric mirror. By positioning the two mirrors 75 mm apart in a…

This article presents research work on a spectroscopic survey telescope. Our idea is as follows: for such a telescope, a pure reflecting optical system is designed, which should have an aperture and a field of view (FOV) both as large as…