Related papers: Mid-Infrared Single-Photon Compressive Spectroscop…
Fourier transform infrared nanospectroscopy (nano-FTIR) is a novel, increasingly adopted characterization method that leverages decades of established knowledge in infrared spectroscopy at the nanoscale. It opens up new possibilities in the…
Hyperspectral imaging is useful for applications ranging from medical diagnostics to agricultural crop monitoring; however, traditional scanning hyperspectral imagers are prohibitively slow and expensive for widespread adoption. Snapshot…
Shortly after their inception, superconducting nanowire single-photon detectors (SNSPDs) became the leading quantum light detection technology. With the capability of detecting single-photons with near-unity efficiency, high time…
The conventional high-level sensing techniques require high-fidelity images as input to extract target features, which are produced by either complex imaging hardware or high-complexity reconstruction algorithms. In this letter, we propose…
Single-photon detectors (SPDs) at near infrared wavelengths with high system detection efficiency (> 90%), low dark count rate (< 1 counts per second, cps), low timing jitter (< 100 ps), and short reset time (< 100 ns) would enable landmark…
We demonstrate superconducting single-photon detectors that integrate signals locally at each pixel. This capability is realized by the monolithic integration of superconducting-nanowire single-photon detectors with Josephson electronics.…
In supercontinuum generation, various propa- gation effects combine to produce a dramatic spec- tral broadening of intense ultrashort optical pulses with far reaching possibilities. Different applications place highly divergent and…
We develop a device model for pixelless converters of far/mid-infrared radiation (FIR/MIR) images into near-infrared/visible (NIR/VIR) images. These converters use polycrystalline graphene layers (PGLs) immersed in the van der Waals (vdW)…
Presented is a novel way to combine snapshot compressive imaging and lateral shearing interferometry in order to capture the spatio-spectral phase of an ultrashort laser pulse in a single shot. A deep unrolling algorithm is utilised for the…
Ultra-broadband imaging devices with high performance are in great demand for a variety of technological applications, including imaging, remote sensing, and communications. An ultra-broadband up-converter is realized based on a p-GaAs…
The potential for improving the penetration depth of optical coherence tomography systems by using increasingly longer wavelength light sources has been known since the inception of the technique in the early 1990s. Nevertheless, the…
Speckle patterns have been widely confirmed that can be utilized to reconstruct the wavelength information. In order to achieve higher resolution, a varies of optical diffusing waveguides have been investigated with a focus on their…
Detecting spatial and temporal information of individual photons by using single-photon-detector (SPD) arrays is critical to applications in spectroscopy, communication, biological imaging, astronomical observation, and quantum-information…
The usually reported pixel resolution of single pixel imaging (SPI) varies between $32 \times 32$ and $256 \times 256$ pixels falling far below imaging standards with classical methods. Low resolution results from the trade-off between the…
Time-resolved near-infrared absorption spectroscopy of single non-repeatable transient events is performed at high spectral resolution with a dual-comb interferometer using a continuous-wave laser followed by a single electro-optic…
Optical spectroscopy plays an essential role across scientific research and industry for non-contact materials analysis1-3, increasingly through in-situ or portable platforms4-6. However, when considering low-light-level applications,…
While single-photon counting is routinely achieved in the optical domain, operational single microwave photon detectors (SMPDs) have only recently been demonstrated. SMPDs are critical for sensing weak signals from incoherent emitters, with…
The optimization of silicon photodiode-based CMOS sensors with backside-illumination for 300-1000 nm wavelength range was studied. It was demonstrated that a single hole on a photodiode increases the optical efficiency of the pixel in…
Detecting mid-infrared (MIR) radiation has significant astronomical applications, although limited by unsatisfactory MIR detectors. Here we reported on the realization of a MIR up-conversion interferometer based on synthetic long base-line…
InGaAs/InP single-photon detectors (SPDs) are the key devices for applications requiring near-infrared single-photon detection. Gating mode is an effective approach to synchronous single-photon detection. Increasing gating frequency and…