Related papers: Flow Characterization of the Delft Multiphase Flow…
Human factors, specifically visual impact and noise production, are the current main limitations for broader urban wind energy exploitation. Trailing edge noise, caused by the turbulent boundary layer interacting with the airfoil surface,…
Well-resolved direct numerical simulations (DNSs) have been performed of the flow in a smooth circular pipe of radius $R$ and axial length $10\pi R$ at friction Reynolds numbers up to $Re_\tau=5200$. Various turbulence statistics are…
In-situ, two-dimensional (2D) Langmuir probe measurements across a large part of the TCV divertor are reported in L-mode discharges with and without divertor baffles. This provides detailed insights into time averaged profiles, particle…
In this article, the hydrodynamic characteristics of Autonomous Underwater Vehicles (AUVs) are investigated and analyzed under the influence of rotating flow fields, that were generated in a recirculating water tank via a rotating…
Results from a new series of experiments on turbulent flows in a rotating circular container are presented. Electromagnetic forcing is applied to induce flow in a layer of fluid of constant depth. Continuously forced as well as decaying…
The transitional regime of plane channel flow is investigated {above} the transitional point below which turbulence is not sustained, using direct numerical simulation in large domains. Statistics of laminar-turbulent spatio-temporal…
In order to support development of computational fluid dynamics codes for high-speed, small-craft applications, laboratory experiments were performed on a representative of Deep-V planing craft model. The measurements included resistance,…
We study the global, i.e. radially averaged, high Reynolds number (asymptotic) scaling of streamwise turbulence intensity squared defined as ${I^2=\overline{u^2}/U^2}$, where $u$ and $U$ are the fluctuating and mean velocities, respectively…
We report a comprehensive set of direct numerical simulation benchmarks of bypass transition in the narrow sense with inlet freestream turbulent intensity levels of 0.75%, 1.5%, 2.25%, 3.0%, and 6.0%, respectively. Detailed descriptions of…
This article presents experimental and numerical studies on the effect of free stream turbulence on evolution of flow over an autonomous underwater vehicle (AUV) hull form at three Reynolds numbers with different submergence depths and…
Strongly turbulent Taylor-Couette flow with independently rotating inner and outer cylinders with a radius ratio of \eta = 0.716 is experimentally studied. From global torque measurements, we analyse the dimensionless angular velocity flux…
Novel experimental modalities acquire spatially resolved velocity measurements for steady state and transient flows which are of interest for engineering and biological applications. One of the drawbacks of such high resolution velocity…
We present velocity spectra measured in three cryogenic liquid 4He steady flows: grid and wake flows in a pressurized wind tunnel capable of achieving mean velocities up to 5 m/s at temperatures above and below the superfluid transition,…
We experimentally study the properties of mean and most probable velocity fields in a turbulent von K\'arm\'an flow. These fields are found to be described by two families of functions, as predicted by a recent statistical mechanics study…
Self-sustained turbulent structures have been observed in a wide range of living fluids, yet no quantitative theory exists to explain their properties. We report experiments on active turbulence in highly concentrated 3D suspensions of…
The convection velocity ($U_C$) of turbulent structures has been studied in adverse-pressure-gradient (APG) turbulent boundary layers (TBLs) for a wide range of Reynolds numbers $Re_\tau = 1400 - 4000$. The study is based on estimation of…
We report Particle Image Velocimetry of the Large Scale Circulation and the viscous boundary layer in turbulent thermal convection. We use two parallelepipedic Rayleigh-B{\'e}nard cells with a top smooth plate. The first one has a rough…
In the last decade, progresses in additive manufacturing (AM) have paved the way for optimized heat exchangers, whose disruptive design will depend on predictive numerical simulations. Typical AM rough surfaces show limited resemblance to…
Experimental measurements of particle dynamics on the lower surface of a 3D Couette cell containing monodisperse spheres are reported. The average radial density and velocity profiles are similar to those previously measured within the bulk…
We used the discrete element method (DEM) to study the flow dynamics of a mixture of dumbbells and discs for two silo cases: 1. orifice situated on the lateral wall and 2. multiple orifices placed on the base of a two-dimensional silo. The…