Related papers: On stress-assisted boundary migration during recry…
We describe the shear flow of a disordered granular material in the presence of grain fracture using the shear-transformation-zone (STZ) theory of amorphous plasticity adapted to systems with a hard-core inter-particle interaction. To this…
The essential role of long range elastic interactions in recrystallization is demonstrated using a simple analytical model: pileup rearrangements following absorption of leading dislocations by a dislocation-free embryo provides an…
Laser surface remelting can be used to manipulate the microstructure of cast material. Here, we present a detailed analysis of the microstructure of Fe$_2$VAl following laser surface remelting. Within the melt pool, elongated grains grow…
The onset of nonlinear effects in metals, such as plasticity and damage, is strongly influenced by the heterogeneous stress distribution at the grain level. This work is devoted to studying the local stress distribution of shear stresses…
Dislocation patterning and self-organization during plastic deformation are associated with work hardening, but the exact mechanisms remain elusive. This is partly because studies of the structure and local strain during the initial stages…
Grain-boundary (GB) local stress is central to the initiation and evolution of long-term creep damage in polycrystalline superalloys. Owing to the high-dimensional nonlinear relationships between the GB stress response and multiple…
Here we analyze a three-dimensional distribution of crystallographic slip measured in-situ during the uniaxial deformation of hexagonal Ti-7Al. The slip field is reconstructed using a novel methodology that combines spatially resolved…
Stress-strain relations for random packings of entangling chains under triaxial compression can exhibit strain stiffening and sustain stresses several orders-of-magnitude beyond typical granular materials. X-ray tomography reveals the…
Polycrystalline materials can be viewed as composites of crystalline particles or grains separated from one another by thin amorphous grain boundary (GB) regions. While GB have been exhaustively investigated at low temperatures, where these…
When granular materials of shape-anisotropic grains are sheared in a split-bottom shear cell, a localized shear band is formed with a depression at its center. This effect is closely related to the alignment of the particles with aspect…
To study the size and strain rate dependency of copper polycrystalline microstructures, a multi-layered copper/Al$_2$O$_3$ thin film was deposited on a Si substrate using a hybrid deposition system (combining physical vapour and atomic…
Digital image correlation of laser-ablated platinum nanoparticles on the surface of a polycrystalline metal (nickel-based superalloy Rene 88DT) was used to obtain the local strain behavior from an in situ scanning electron microscope…
Predicting the behaviour of complex systems is one of the main goals of science. An important example is plastic deformation of micron-scale crystals, a process mediated by collective dynamics of dislocations, manifested as broadly…
Interface migration in microstructures is mediated by the motion of line defects with step and dislocation character, i.e., disconnections. We propose a continuum model for arbitrarily-curved grain boundaries or heterophase interfaces…
We experimentally measure a three-dimensional (3D) granular system's reversibility under cyclic compression. We image the grains using a refractive-index-matched fluid, then analyze the images using the artificial intelligence of…
The three-dimensional microstructure of Ni, observed after five annealing intervals, was compared to simulations of grain growth using the threshold dynamics method with the assumption of capillarity as the only driving force. A…
Nanocrystalline (NC) materials are intrinsically unstable against grain growth. Significant research efforts have been dedicated to suppressing the grain growth by solute segregation, including the pursuit of a special NC structure that…
External magnetic fields influence the microstructure of polycrystalline materials. We explore the influence of strong external magnetic fields on the long time scaling of grain size during coarsening in thin films with an extended…
Understanding the nucleation and growth of polycrystalline thin films is a long-standing goal. Polycrystalline films have many grains with different orientations that affect thin-film properties. Numerous studies have been done to determine…
Achieving a combination of high mechanical strength and high electrical conductivity in low-weight Al alloys requires a full understanding of the relationships between nanoscaled features and physical properties. Grain boundary…