Related papers: On stress-assisted boundary migration during recry…
Grain growth is a key process in the thermomechanical treatment of metals. Recently, the presence of local residual stresses within fully recrystallized grains has attracted increasing interest in connection with shear-coupled grain…
Previous studies demonstrate that grain-boundary sliding could accelerate creep rate and give rise to large internal stresses that can lead to damage development, e.g. formation of wedge cracks. The present study provides more insight into…
We present an original approach for predicting the static recrystallization texture development during annealing of deformed crystalline materials. The microstructure is considered as a population of subgrains and grains whose sizes and…
The grain boundary-mediated mechanisms that control plastic deformation of nanocrystalline metals should cause evolution of the grain boundary network, since they directly alter misorientation relationships between crystals. Unfortunately,…
High energy x-ray diffraction microscopy was used to image the microstructure of $\alpha$-Fe before and after a 600 $^\circ$C anneal. These data were used to determine the areas, curvatures, energies, and velocities of approximately 40,000…
We utilized synchrotron-based in-situ diffraction and dominant shear deformation to identify, dissect, and quantify the relevant deformation mechanisms in nanocrystalline $\mathrm{Pd}_{90}\mathrm{Au}_{10}$ in the limiting case of grain…
We investigate analytically and numerically the interaction between grain boundaries and second phase precipitates in two-phase coherent solids in the presence of misfit strain. Our numerical study uses amplitude equations that describe the…
A simple analytical model of intergranular normal stresses is proposed for a general elastic polycrystalline material with arbitrary shaped and randomly oriented grains under uniform loading. The model provides algebraic expressions for the…
The dynamics of dislocation assemblies in deforming crystals indicate the emergence of collective phenomena, intermittent fluctuations and strain avalanches. In polycrystalline materials, the understanding of plastic deformation mechanisms…
We present a detailed numerical study on structure and local magnetic properties of $\langle 100 \rangle$ symmetric tilt grain boundaries in bcc-iron. Particular attention is paid to connection between type of grain boundary relaxation and…
Slip transfer across grain boundaries was studied in annealed polycrystalline Al foils deformed in uniaxial tension by means of the analysis of the slip traces on the specimen surface. Grain orientations and selected grain boundary…
Molecular dynamics simulations were used to quantify mechanically-induced structural evolution in nanocrystalline Al with an average grain size of 5 nm. A polycrystalline sample was cyclically strained at different temperatures, while a…
Three-dimensional X-ray diffraction (3DXRD) has been used to measure, in-situ, the evolution of $\sim 1800$ grains in a single phase low carbon ferritic steel sample during uniaxial deformation. The distribution of initial residual grain…
Understanding the grain boundary deformation dynamics is very crucial to designing materials with stable microstructures. With this quest, the deformation behavior of coherent twin boundary under cyclic shear loading has been studied in…
Synchrotron Laue microdiffraction and Digital Image Correlation measurements were coupled to track the elastic strain field (or stress field) and the total strain field near a general grain boundary in a bent bicrystal. A 316L stainless…
Thermodynamic dislocation theory incorporating dislocation impediment by the grain boundaries is developed to analyze the shear test of polycrystals. With a small set of physics based material parameters, we are able to simulate the…
Recrystallization is a phenomenon in which a plastically deformed polycrystalline microstructure with a high dislocation density transforms into another that has low dislocation density. This evolution is driven by the stored energy in…
Grain boundary sliding is typically associated with high temperature deformation in engineering alloys. Here, we examine grain boundary sliding at room temperature in oxygen-free high-conductivity copper under quasi-static tensile testing.…
Grain rotation and grain boundary (GB) sliding are two important mechanisms for grain coarsening and plastic deformation in nanocrystalline materials. They are in general coupled with GB migration and the resulting dynamics, driven by…
Grain boundary sliding (GBS) is a key deformation mechanism at high homologous temperatures in polycrystalline materials, however, its intrinsic behavior is often obscured by additional strain accommodation processes. In this study,…