Related papers: Using Fast Reading Current Integrator for Advanced…
The projected rapid growth of battery cell production over the next decade demands advanced diagnostic tools for quality control, ageing prediction, and recycling. Most existing techniques lack the spatial and temporal resolution required…
A liquid isooctane (C$_{8}$H$_{18}$) filled ionization linear array for radiotherapy quality assurance has been designed, built and tested. The detector consists of 128 pixels, each of them with an area of 1.7 mm $\times$ 1.7 mm and a gap…
A new method for high efficiency interaction-free measurement is presented. Selective transmission of multiple beam interference is used to generate a continuous wave target beam with an irradiance level ~1% that of a reference beam. When…
Detector characterization and instrumentation testing are often performed at cyclotron and synchrotron facilities, many of which were originally developed for medical applications in cancer therapy. For particle physics experiments…
In proton therapy, depth scanning of the irradiated object is performed by changing the Output Energy (OE) of the accelerated beam. In pulsed linear accelerators, adjustment of the OE is usually by changing the amplitude and/or phase of the…
Superionic conductors, or solid-state ion-conductors surpassing 0.01 S/cm in conductivity, can enable more energy dense batteries, robust artificial ion pumps, and optimized fuel cells. However, tailoring superionic conductors require…
Scalable coherent control hardware for quantum information platforms is rapidly growing in priority as their number of available qubits continues to increase. As these systems scale, more calibration steps are needed, leading to challenges…
Enhanced-accuracy ion-range verification in real time shall enable a significant step forward in the use of therapeutic ion beams. Positron-emission tomography (PET) and prompt-gamma imaging (PGI) are two of the most promising and…
A beam splitter is a key component used to direct and combine light paths in various optical and microwave systems. It plays a crucial role in devices like interferometers, such as the Mach-Zehnder and Hong-Ou-Mandel setups, where it splits…
A novel readout architecture that uses multiple non-destructive floating-gate amplifiers to achieve sub-electron readout noise in a thick, fully-depleted silicon detector is presented. This Multi-Amplifier Sensing Charge-Coupled Device…
We present a relatively simple time domain method for determining the bandpass response of a system by injecting a nanosecond pulse and capturing the system voltage output. A pulse of sub-nanosecond duration contains all frequency…
Front-end electronics equipped with high-speed digitizers are being used and proposed for future nuclear detectors. Recent literature reveals that deep learning models, especially one-dimensional convolutional neural networks, are promising…
Nowadays a diverse range of physiological data can be captured continuously for various applications in particular wellbeing and healthcare. Such data require efficient methods for classification and analysis. Deep learning algorithms have…
Plasma impedance probes (PIPs) are a type of RF probe that primarily measure electron density. This work introduces two advancements: a streamlined analytical model for interpreting PIP-monopole measurements and techniques for achieving…
Semi-transparent mirrors are standard elements in light optics for splitting light beams or creating two versions of the same image. Such mirrors do not exist in electron optics, although they could be beneficial in existing techniques such…
In this article, we present a detailed characterisation of a multicusp-assisted inductively coupled RF plasma source for plasma immersion ion implantation (PIII). Using laser-induced fluorescence (LIF) and RF-compensated Langmuir probe…
We present the design of a Faraday cup-like charged particle detector in a four quadrant configuration aimed at facilitating the alignment of low-intensity beams of exotic particles. The device is capable of assessing the current on the…
The VAMOS++ magnetic spectrometer is a multi-parametric system that integrates ion optical magnetic elements with a multi-detector stack. The magnetic elements, along with the tracking and timing detectors and the trajectory reconstruction…
A picoammeter system has been developed and engineering. It consists in a current-voltage converter, based on an operational amplifier with very low input current, a high precision ADC, a radio controlled data acquisition unit and the…
Recording reliably extracellular neural activities isan essential prerequisite for the development of bioelectronicsand neuroprosthetic applications. Recently, a fully differential,2-stage, integrating pre-amplifier was proposed for…