Related papers: Microstructural Evolution and Crystallization Beha…
We studied metallic Ag formation inside and on the surface of Ag2S thin films, induced by the electric field created with a STM tip. Two clear regimes were observed: cluster formation on the surface at low bias voltages, and full…
Spray deposition and inkjet printing of various nanostructures are emerging complementary methods for creating conductive coatings on different substrates. In comparison to established deposition techniques like vacuum metal coating and…
In this work, we have demonstrated wide-composition-range \b{eta}-(AlxGa1-x)2O3 thin films with record-high Al compositions up to 77% for \b{eta}-(AlxGa1-x)2O3 covering bandgaps from 4.9 to 6.4 eV. With optimized thermal annealing…
Microstructure changes during annealing of nano-crystalline silver and amorphous silicon multilayers (Ag/a-Si) have been studied by X-ray diffraction and transmission electron microscopy. The dc-magnetron sputtered Ag/a-Si multilayers…
We report on \textit{in situ} growth of crystalline Al and Nb shells on InAs nanowires. The nanowires are grown on Si(111) substrates by molecular beam epitaxy (MBE) without foreign catalysts in the vapor-solid mode. The metal shells are…
Many investigations and reviews show that II-VI compound semiconductor 1-D nanostructures have a great potential for the future electronic and optoelectronic applications. As an important II-VI semiconductor, ZnSe is one of the most…
An in-situ nanoscopic investigation of the prototypical surface alloying system Ag/Pt(111) is reported. The morphology and the structure of the ultrathin Ag-Pt film is studied using Low Energy Electron Microscopy during growth at about 800…
The binary manganese aluminium (MnAl) alloy with L$1_0$ crystal structure is a promising rare earth element-free permanent magnetic material because of its exceptional magnetic properties. However, experimentally synthesizing it in a stable…
Defining the magnetic anisotropy for in-plane or out-of-plane easy axis in ferrimagnetic insulators films by controlling the strain, while maintaining high-quality surfaces, is desirable for spintronic and magnonic applications. We…
Magnetic impurities provide a route toward increasing functionality in electronic materials, often enabling new device concepts and architectures. In the case of topological semimetals, dilute magnetic doping presents a particularly…
A two PDEs-based model is developed for studies of a morphological and compositional evolution of a thermodynamically stable alloy surface in a strong electric field, assuming different and anisotropic diffusional mobilities of the two…
A systematic experimental and theoretical study about substrate induced molecular conformation in rubrene thin films by varying film thickness from sub-monolayer to multilayer, which currently attracts substantial attention with regard to…
We present a comprehensive study relating the nanostructure of Ge_0.95Mn_0.05 films to their magnetic properties. The formation of ferromagnetic nanometer sized inclusions in a defect free Ge matrix fabricated by low temperature molecular…
Superplastic behavior of ultrafine-grained (UFG) Al-6Mg-0.12Sc-0.10Zr-0.1X alloys, where X = Yb (Alloy #1-Yb), Er (Alloy #2-Er), and Hf (Alloy #3-Hf), has been studied. The total content of Sc, Zr, Yb, Er, Hf in the alloys was 0.32 wt.%…
(111) NiO epitaxial layers embedded with crystallographically oriented Ni-clusters are grown on c-GaN/Sapphire templates using pulsed laser deposition technique. Structural and magnetic properties of the films are examined by a variety of…
Epitaxially grown full Heusler alloy of Rh2MnSb thin films were prepared for the first time using DC magnetron sputtering. The films were deposited on MgO [001] substrates with a deposition temperature of 600{\deg}C, 700{\deg}C, and…
Mechanical exfoliation of bulk crystals has been widely used to obtain thin topological insulator (TI) flakes for device fabrication. However, such a process produces only micro-sized flakes that are highly irregular in shape and thickness.…
Annealing Mg-implanted homoepitaxial GaN at temperatures at or above 1400 {\deg}C eliminates the formation of inversion domains and leads to improved dopant activation efficiency. Extended defects in the form of inversion domains contain…
The effects of thermal treatments on metallic glass nanolaminates (NLs), with a composition of Zr$_{24}$Cu$_{76}$ and Zr$_{61}$Cu$_{39}$ and a bilayer period of 50 nm, were explored to control their mechanical properties through…
In the present work, a thin film was deposited on quartz substrate by reactive RF magnetron sputtering of high purity (99.999%) aluminium target using ultra-high pure (Ar + N2) gas mixture. The percentage ratio of Ar and N2 in the gas…