Related papers: 3D Printed Alumina as a Millimeter-Wave Optical El…
This paper reports on 3D-printed dielectric image lines for low-loss subTHz applications between 140 and 220 GHz. In contrast to conventional dielectric waveguides, a conductive copper substrate is used to achieve robust routing and…
A hemispherical multilayer wide-band (7-13 GHz) band-pass frequency selective surface (FSS) is reported. A new design technique based on a Goldberg discretization and unit cell scaling technique is introduced to accommodate the curved…
In this study structural and mechanical properties of a 1 um thick Al2O3 coating, deposited on 316L stainless steel by Pulsed Laser Deposition (PLD), subjected to high energy ion irradiation were assessed. Mechanical properties of pristine…
We have developed a novel two-layer anti-reflection (AR) coating method for large-diameter infrared (IR) filters made of alumina, for the use at cryogenic temperatures in millimeter wave measurements. Thermally- sprayed mullite and…
We experimentally demonstrate the effect of anomalous breakdown of the effective medium approximation in all-dielectric deeply subwavelength thickness ($d \sim\lambda/160-\lambda/30$) multilayers, as recently predicted theoretically [H.H.…
Silicon photonics has thrived in telecommunications over recent decades, and its extension to the mid-infrared range has the potential to unlock valuable opportunities for sensing, imaging, and free-space communications. With this…
We established a production method of a good millimeter-wave absorber by using a 3D-printed mold. The mold has a periodic pyramid shape, and an absorptive material is filled into the mold. This shape reduces the surface reflection. The…
Refractive optical elements are widely used in millimeter and sub-millimeter astronomical telescopes. High resistivity silicon is an excellent material for dielectric lenses given its low loss-tangent, high thermal conductivity and high…
We present fabrication of 570-um-thick, millimeter-sized soda-lime-silicate float glass blocks with a 1-um-thick AlN-thin-film piezoelectric transducer sandwiched between thin metallic electrodes and deposited on the top surface. The…
The absorption length, $\lambda_{abs}$, of light with wavelengths between 0.95 and 1.30$~\mu$m in silicon irradiated with 24$~$GeV/c protons to 1$~$MeV neutron equivalent fluences between 0 and $8.6 \times 10^{15}~$cm$^{-2}$ has been…
We observed and studied strong reduction of optical reflection from the surface of InP wafers after high-temperature annealing. The effect is observed over a wide range of the incident wavelengths, and in the transparency band of the…
We present an initial study of one of the first ALMA Band 3 observations of the Sun with the aim to characterise the diagnostic potential of brightness temperatures measured with ALMA on the Sun. The observation covers 48min at a cadence of…
Radio-frequency (RF) sputtering is a low-cost technique for the deposition of large-area single-phase AlInN on silicon layers with application in photovoltaic devices. Here, the effect of the Al mole fraction x from 0 to 0.56 on the…
Protecting superconducting quantum circuits from non-ideal return loss, including out-of-band circulator behavior and enhancing the performance of broadband quantum-limited amplifiers can be accomplished using a superconducting version of a…
Photonic integrated circuits (PICs) are vital for developing affordable, high-performance optoelectronic devices that can be manufactured at an industrial scale, driving innovation and efficiency in various applications. Optical loss of…
We describe an experimental platform that generates infrared images of micrometer-sized samples in the high pressure region of a diamond anvil cell. Using a 2.3 micron laser as a source of radiation, the system will be particularly useful…
We present the design, fabrication, and characterization of a 100 mm diameter, flat, gradient-index (GRIN) lens fabricated with high-resistivity silicon, combined with a three-layer anti-reflection (AR) structure optimized for 160-355 GHz.…
An analog, low-profile and shielded spectrum analyzer is proposed for operation at mm-wave frequencies around the 60 GHz band based on a novel side-fire Leaky-Wave Antenna (LWA) configuration. The proposed side-fire periodic LWA is…
Three dimensional (3D) fast (< 0.5 hour) printing of micro-optical elements down to sub-wavelength resolution over 100 micrometers footprint areas using femtosecond (fs-)laser oscillator is presented. Using sub-1 nJ pulse energies, optical…
Ultrathin metasurfaces have recently emerged as promising materials to enable novel, flat optical components and surface-confined, miniature photonic devices. However, experimental realization of high-performance metasurfaces at visible…