Related papers: Initial observations in X-point target divertor di…
Strong divertor baffling is a feature expected to have a number of advantages for core-edge integration in tokamaks, yet one which requires much more detailed and extensive study. In this work, the impacts of baffling on a hydrogenic plasma…
High resolution Fulcher band spectroscopy was used in the MAST-U divertors during Super-X and elongated conventional divertor density ramps with $\text{D}_{2}$ fuelling from the mid-plane high-field side. In the Super-X case (density ramp…
KSTAR has recently undergone an upgrade to use a new Tungsten divertor to run experiments in ITER-relevant scenarios. Even with a high melting point of Tungsten, it is important to control the heat flux impinging on tungsten divertor…
It is found that the X-Divertor (XD) configuration [1-3] can be made with the conventional PF coil set on ITER[4], where all PF coils are outside the TF coils. Desirable configurations are possible where the PF currents are below the…
For the ITER-like wall, the JET mirror link divertor spectroscopy system was redesigned to fully cover the tungsten horizontal strike plate with faster time resolution and improved near-UV performance. Since the ITER-like wall project…
During detachment, a buffer of neutral atoms and molecules builds up between the target and the ionising plasma. Collisions between the plasma and the molecules play an important role in the detachment process. Studies of plasma-molecular…
Sustained ELM mitigation has been achieved on MAST and AUG using RMPs with a range of toroidal mode numbers over a wide region of low to medium collisionality discharges. The ELM energy loss and peak heat loads at the divertor targets have…
To understand the essence of the exciton Mott transition in three-dimensional electron-hole systems, the metal-insulator transition is studied for a two-band Hubbard model in infinite dimensions with interactions of electron-electron…
The design of divertor targets and baffles for optimal heat and particle exhaust from magnetically confined fusion plasmas requires a combination of fast, low-fidelity models (such as EMC3-lite [1]) for scoping studies and high-fidelity…
Exhausting power from the hot fusion core to the plasma-facing components is one of the biggest challenges in fusion energy. The MAST Upgrade tokamak uniquely integrates strong containment of neutrals within the exhaust area (divertor) with…
Overdense plasmas have been attained with 2.45 GHz microwave heating in the low-field, low-aspect-ratio CNT stellarator. Densities higher than four times the ordinary (O) mode cutoff density were measured with 8 kW of power injected in the…
The extremely high power densities and short durations of single pulses of x-ray free electron lasers (XFELs) have opened new opportunities in atomic physics, where complex excitation-relaxation chains allow for high ionization states in…
A potentially important feature in a divertor design for a high-power tokamak is an extended and expanded divertor leg. The upgrade to MAST will allow a wide range of such divertor leg geometries to be produced, and hence will allow the…
With edge plasma code SOLS-ITER, we study four Snowflake (SF) configurations for an ITER-size tokamak, with toroidal magnetic field BT=5T, major radius R=5m and plasma current Ip=10MA. Our aim is to provide insights on SF divertor design…
Exciton many-body interaction bear great implication for application in advanced photonic devices and quantum science and technology such as quantum computing, but the fundamental understanding about exciton many-body interaction is very…
Excited-state charge-transfer complexes (exciplexes) have been actively exploited in organic optoelectronic devices to improve performance; however, diffusion of exciplexes has not been actively studied despite its influence on performance…
Power exhaust is one of the major challenges for a future fusion device. Applying a non-axisymmetric external magnetic perturbation is one technique that is studied in order to mitigate or suppress large edge localized modes which accompany…
L-mode negative triangularity (NT) operation is a promising alternative to the positive triangularity (PT) H-mode as a high-confinement ELM-free operational regime. In this work, two TCV L-mode lower single null Ohmic discharges with…
Edge fluid modeling of the first divertor-plasma detachment experiments in negative triangularity discharges on DIII-D is presented using the 2D multi-fluid code UEDGE, including cross-field particle drifts. Density scans are performed to…
The I-mode confinement regime can feature small edge temperature drops that can lead to an increase in the energy deposited onto the divertor targets. In this work, we show that these events are associated with a relaxation of both electron…