Related papers: Increasing The Sensitivity of a Surface Plasmon Re…
A mirrored bilayer structure incorporating layers of Graphene and MoS2 is proposed here for Surface Plasmon Resonance (SPR) biosensing and its performance is evaluated numerically. Starting from the basic configuration, the structure with…
Surface Plasmon Resonance (SPR) offers a powerful tool for label-free and non-invasive characterization of biomolecular interactions. To date, several experimental configurations, based on two fundamental physical phenomena, e.g.,…
A broadband detection method with coherent laser pulses exciting surface plasmons is investigated. The intensity and phase characteristics of the reflected light in Kretschmann configuration are calculated. It is shown that by mixing…
Plasmonic metamaterials support the localized surface plasmon resonance (LSPR), which is sensitive to the change in the dielectric environment and highly desirable for ultrasensitive biochemical sensing. In this work, a novel design of…
The spectral response and directional scattering of semiconductor-oxide core-shell spherical microparticles embedded in an insulating medium at low volume fraction are computed using Mie Theory and Multiscale Modelling methods. The surface…
Photonic crystal fiber (PCF)-based plasmonic sensors have gained considerable attention because of their highly sensitive performance and broad range of sensing regimes. In this work, a relatively simple ultra-sensitive PCF-based surface…
We present a simulation guided design for a multilayer surface plasmon resonance (SPR) based biosensor capable of detecting refractive index changes in a target induced by analytes. Surface plasmons are excited using a hybrid Kretschmann…
Plasmonic sensing is an established technology for real-time biomedical diagnostics and air-quality monitoring. While intensity and wavelength tracking are the most commonly used interrogation methods for Surface Plasmon Resonance (SPR),…
The use of graphene in surface plasmon resonance sensors, covering a metallic (plasmonic) film, has a number of demonstrated advantages, such protecting the film against corrosion/oxidation and facilitating the introduction of functional…
A surface plasmon resonance imaging biosensor based on $\text{MoS}_2$ deposited on Aluminium substrate is designed for high imaging sensitivity and detection accuracy. The proposed biosensor exhibits better performance than graphene-based…
A refractive index sensor based on a semicircular bent fiber is presented. The interference occurs between the cladding mode excited in the bending region and the core mode. Both the theoretical and experimental results show that the…
We present a metamaterial-based terahertz (THz) sensor for thickness measurements of subwavelength-thin materials and refractometry of liquids and liquid mixtures. The sensor operates in reflection geometry and exploits the frequency shift…
This paper presents a comprehensive study on a novel multilayer surface plasmon resonance (SPR) biosensor designed for detecting trace-level toxins in liquid samples with exceptional precision and efficiency. Leveraging the Kretschmann…
We theoretically demonstrate a high-sensitivity, graphene-plasmon based refractive index sensor working in the mid-infrared at room temperature. The bulk figure of merit of our sensor reaches values above $10$, but the key aspect of our…
The possibility of constructing a surface exciton polariton (SEP) based sensor at room temperature is explored. The proposed SEP sensor is based on the Kretschmann-Raether configuration of conventional surface plasmon resonance (SPR)…
This study introduces a graphene-assisted terahertz metamaterial absorber operating at a resonance frequency of 8.436 THz. The unit cell incorporates a graphene-based split-ring resonator (SRR) configuration with additional auxiliary splits…
Reducing the noise below the shot-noise limit in sensing devices is one of the key promises of quantum technologies. Here, we study quantum plasmonic sensing based on an attenuated total reflection configuration with single photons as…
In this paper, we study the sensitivity-tunable Terahertz (THz) liquid/gas biosensor in a coupling prism-three-dimensional Dirac semimetal (3D DSM) multilayer structure. The high sensitivity of the biosensor originates from the sharp…
In this paper, we present a plasmonic refractometric sensor that works under normal incidence; allowing its integration on a fiber tip. The sensor's material and geometry exploit the large scattering cross-section given by high-contrast of…
Surface plasmon resonance (SPR) has been widely utilized to improve the absorption performance in the photosensors. Graphene has emerged as a promising plasmonic material, which supports tunable SPR and shows significant flexibility over…