Related papers: Free-Running Ring Quantum Cascade Laser with 50 kH…
One salient characteristic of Quantum Cascade Laser (QCL) is its very shor gain recovery time that so far thwarted the attempts to achieve self-mode locking of the device into a train of single pulses. We show theoretically that four wave…
The manufacturing cost of quantum cascade lasers is still a major bottleneck for the adoption of this technology for chemical sensing. The integration of Mid-Infrared sources on Si substrate based on CMOS technology paves the way for…
We miniaturize a vertically-coupled in-plane whispering gallery mode cavity incorporating a quantum cascade gain medium, aiming to realize the mid-infrared counterpart to the vertical cavity surface emitting laser (VCSEL). Building on…
Phase noise or frequency noise is a key metrics to evaluate the short term stability of a laser. This property is of a great interest for the applications but delicate to characterize, especially for narrow line-width lasers. In this…
It has been found that noise-induced excitability in quantum well and quantum dot semiconductor laser systems usually produces spike patterns of non-uniform amplitude. In this letter, we experimentally record that an inter-subband quantum…
High brightness and low coherence laser sources with wideband tunability are essential for many full-field imaging applications aiming for high contrast and speckle free performance. However, this combination of parameters is challenging to…
Many experiments in atomic physics and quantum optics, among them optical atomic clocks, require laser sources in the ultra-violet wavelength range with very low intensity noise and phase noise. The development of such lasers is a…
We demonstrate a method that enables accurate timing jitter spectral density characterization of free-running mode-locked laser oscillators over more than 10-decade of Fourier frequency from mHz to tens MHz range. The method is based on…
We present a free-running 80-MHz dual-comb polarization-multiplexed solid-state laser which delivers 1.8 W of average power with 110-fs pulse duration per comb. With a high-sensitivity pump-probe setup, we apply this free-running dual-comb…
We at RRCAT have recently developed high power laser diodes in the wavelength range of 740 to 1000 nm. A typical semiconductor laser structure is consisted of about 10 epilayers with different composition, thickness and doping values. For…
Laser phase noise remains a limiting factor in many experimental settings, including metrology, time-keeping, as well as quantum optics. Hitherto this issue was addressed at low frequencies, ranging from well below 1 Hz to maximally 100…
Interactions between atoms and lasers provide the potential for unprecedented control of quantum states. Fulfilling this potential requires detailed knowledge of frequency noise in optical oscillators with state-of-the-art stability. We…
We demonstrate a 1 GHz prismless femtosecond Ti:sapphire ring laser which emits 890 mW for 7.6W of pump power over a continuum extending from 585 to 1200 nm at -20 dB below the maximum. A broadband continuum is obtained without careful…
Quantum cascade lasers (QCLs) are becoming a key tool for plenty of applications, from the mid-infrared (mid-IR) to the THz range. Progress in related areas, such as the development of ultra-low-loss crystalline microresonators, optical…
We report the unequivocal demonstration of mid-infrared mode-locked pulses from a semiconductor laser. The train of short pulses was generated by actively modulating the current and hence the optical gain in a small section of an…
We calculate the quantum-limited shape of the comb lines from a mode-locked Ti:sapphire laser using experimentally-derived parameters for the linear response of the laser to perturbations. The free-running width of the comb lines is found…
We present the characterization of the photonic waveguide resonator using confocal laser scanning microscopy imaging method. Free space TEM$_{00}$ laser mode is coupled into quasi-TE$_{0}$ waveguide mode using confocal microscopy via a…
Lasers are the workhorse of quantum engineering in the atomic-molecular-optic community. However, phase noise of the laser, which can be especially large in popular semiconductor-based lasers, can limit fidelity of operation. Here, we…
The performance of a coherent perfect absorber (time-reversed laser) is limited by quantum and thermal noise. At zero temperature, the quantum shot noise dominates the signal for frequencies close to the resonance frequency, and both vanish…
High-quality (Q)-factor optical resonators with extreme temporal coherence are of both technological and fundamental importance in optical metrology, continuous-wave lasing, and semiconductor quantum optics. Despite extensive efforts in…