Related papers: Single-step laser patterning and thinning of bioco…
Elastic MicroPhase Separation (EMPS) provides a simple route to create soft materials with homogeneous microstructures by leveraging the supersaturation of crosslinked polymer networks with liquids. At low supersaturation, network…
Thin-film solid-state metal dealloying (thin-film SSMD) is a promising method for fabricating nanostructures with controlled morphology and efficiency, offering advantages over conventional bulk materials processing methods for integration…
Metal-coated microsphere monolayers (MCM) are a class of plasmonic crystals consisting of noble metal films over arrays of self-assembled colloidal microspheres. Despite their ease of fabrication and tunable plasmonic response, their…
The rising complexity of cutting-edge cryogenic systems is currently imposing challenging technical constraints to the monitoring of ultra-cold temperatures through standard commercially available sensors. Among different alternative…
Integrating patterned, low-loss magnetic materials into microwave devices and circuits presents many challenges due to the specific conditions that are required to grow ferrite materials, driving the need for flip-chip and other indirect…
Single-photon detection via absorption in current-biased nanoscale superconducting structures has become a preferred technology in quantum optics and related fields. Single-mode fiber packaged devices have seen new records set in detection…
In recent decades, the laws of thermodynamics have been pushed down to smaller and smaller scales, within the field of stochastic thermodynamics and state-of-art experiments performed on mesoscopic systems. These measurements concern…
We present electrothermal microelectromechanical (MEMS) actuators as a practical platform for straining 2D materials. The advantages of the electrothermal actuator is its high output force and displacement for low input voltage, but its…
The next generation of ultra-low-noise cryogenic detectors for space science applications require continued exploration of materials characteristics at low temperatures. The low noise and good energy sensitivity of current Transition Edge…
Thermal diode, a type of device that allows heat to flow in one direction preferentially, can be employed in many thermal applications. However, if the mechanical compliance of the thermal diode is poor, which prevents its intimate contact…
Understanding heat transport at the nanometer scale is critical for semiconductor devices, quantum materials, and thermal management of nanostructures, yet direct local measurements of thermal conductivity and heat capacity remain scarce.…
Microelectromechanical systems (MEMS) can offer a competitive alternative for conventional technology in electrical precision measurements. This article summarises recent work in development of MEMS solutions for electrical metrology.…
We present an efficient mixed finite element method to solve the fourth-order thin film flow equations using moving mesh refinement. The moving mesh strategy is based on harmonic mappings developed by Li et al. [J. Comput. Phys., 170…
For modern Gas sensors, high sensitivity and low power are expected. This paper discusses design, simulation and fabrication of new Micromachined Thermal Converters (MTCs) based on GaAs developed for Gas sensors. Metal oxide gas sensors…
Monochromators are an essential component in electron microscopy and spectroscopy for enhancing the spatial and energy resolution. However, its adoption in scanning electron microscopes remains limited because of its high cost and…
A variety of scientific fields like proteomics and spintronics have created a new demand for on-chip devices capable of sensing parameters localized within a few tens of micrometers. Nano and microelectromechanical systems (NEMS/MEMS) are…
A thermal position sensor was fabricated and evaluated. The device consists of an array of temperature sensing elements, fabricated entirely on a plastic substrate. A novel fabrication technology was implemented which allows direct…
The tuning of fused filament fabrication parameters is notoriously challenging. We propose an autonomous data-driven method to select parameters based on in situ measurements. We use a laser sensor to evaluate the surface roughness of a…
We report on a modified transfer technique for atomically thin materials integrated onto microelectromechanical systems (MEMS) for studying strain physics and creating strain-based devices. Our method tolerates the non-planar structures and…
Sample thickness is an important parameter in transmission electron microscopy (TEM) imaging, for interpreting image contrast and understanding the relationship between properties and microstructure. In this study, we introduce a method for…