Related papers: WIRE: Write Energy Reduction via Encoding in Phase…

Computing-in-memory (CIM) has attracted significant attentions in recent years due to its massive parallelism and low power consumption. However, current CIM designs suffer from large area overhead of small CIM macros and bad programmablity…

Refresh is an important operation to prevent loss of data in dynamic random-access memory (DRAM). However, frequent refresh operations incur considerable power consumption and degrade system performance. Refresh power cost is especially…

The speed of modern digital systems is severely limited by memory latency (the ``Memory Wall'' problem). Data exchange between Logic and Memory is also responsible for a large part of the system energy consumption. Logic--In--Memory (LiM)…

Processing-in-memory (PIM) is a promising computing paradigm to tackle the "memory wall" challenge. However, PIM system-level benefits over traditional von Neumann architecture can be reduced when the memory array cannot fully store all the…

Processing-in-memory (PIM) has emerged as a promising solution for accelerating memory-intensive workloads as they provide high memory bandwidth to the processing units. This approach has drawn attention not only from the academic community…

Computing-In-Memory (CIM) offers a potential solution to the memory wall issue and can achieve high energy efficiency by minimizing data movement, making it a promising architecture for edge AI devices. Lightweight models like MobileNet and…

Data movement between memory and processors is a major bottleneck in modern computing systems. The processing-in-memory (PIM) paradigm aims to alleviate this bottleneck by performing computation inside memory chips. Real PIM hardware (e.g.,…

Computing-in-Memory architectures based on non-volatile emerging memories have demonstrated great potential for deep neural network (DNN) acceleration thanks to their high energy efficiency. However, these emerging devices can suffer from…

The continuing advancement of memory technology has not only fueled a surge in performance, but also substantially exacerbate reliability challenges. Traditional solutions have primarily focused on improving the efficiency of protection…

Inefficient data transfer between computation and memory inspired emerging processing-in-memory (PIM) technologies. Many PIM solutions enable storage and processing using memristors in a crossbar-array structure, with techniques such as…

Feature coding for machines (FCM) is a lossy compression paradigm for split-inference. The transmitter encodes the outputs of the first part of a neural network before sending them to the receiver for completing the inference. Practical FCM…

The read channel of a Flash memory cell degrades after repetitive program and erase (P/E) operations. This degradation is often modeled as a function of the number of P/E cycles. In contrast, this paper models the degradation as a function…

Compute-in-memory (CIM) techniques are widely employed in energy-efficient artificial intelligent (AI) processors. They alleviate power and latency bottlenecks caused by extensive data movements between compute and storage units. To extend…

Modern computing systems suffer from the dichotomy between computation on one side, which is performed only in the processor (and accelerators), and data storage/movement on the other, which all other parts of the system are dedicated to.…

Magnetic random-access memory (MRAM) is a promising memory technology due to its high density, non-volatility, and high endurance. However, achieving high memory fidelity incurs significant write-energy costs, which should be reduced for…

Dynamic Random Access Memory (DRAM) is the prevalent memory technology used to build main memory systems of almost all computers. A fundamental shortcoming of DRAM is the need to refresh memory cells to keep stored data intact. DRAM refresh…

Several emerging technologies for byte-addressable non-volatile memory (NVM) have been considered to replace DRAM as the main memory in computer systems during the last years. The disadvantage of a lower write endurance, compared to DRAM,…

Variable length coding for Non-Volatile Memory (NVM) technologies is a promising method to improve memory capacity and system performance through compressing memory blocks. However, compression techniques used to improve capacity or…

This paper discusses recent research that aims to enable computation close to data, an approach we broadly call processing-in-memory (PIM). PIM places computation mechanisms in or near where the data is stored (i.e., inside memory chips or…

Traditional DRAM-based main memory systems face several challenges with memory refresh overhead, high latency, and low throughput as the industry moves towards smaller DRAM cells. These issues have been exacerbated by the emergence of…