Related papers: Inter-Spacecraft Tilt-to-Length Noise Reduction Al…
The ongoing development of the space-based laser interferometer missions is aiming at unprecedented gravitational wave detections in the millihertz frequency band. The spaceborne nature of the experimental setups leads to a degree of…
The Laser Interferometer Space Antenna (LISA) mission aims to detect gravitational waves by interferometrically measuring the change of separation between free-falling test masses (TMs). LISA's interferometers must deliver pm/rtHz…
The space-based laser interferometers, LISA, Taiji and TianQin, are targeting to observe milliHz gravitational waves (GWs) in the 2030s. The joint observations from multiple space-based detectors yield significant advantages. In this work,…
High-precision inertial sensors or accelerometers can provide us references of free-falling motions in gravitational field in space. They serve as the key payloads for gravity recovery missions such as the CHAMP, the GRACE-type missions,…
Interspacecraft ranging is crucial for the suppression of laser frequency noise via time-delay interferometry (TDI). So far, the effects of on-board delays and ambiguities on the LISA ranging observables were neglected in LISA modelling and…
A recent proposal describes space based gravitational wave (GW) detection with optical lattice atomic clocks [Kolkowitz et. al., Phys. Rev. D 94, 124043 (2016)] [1]. Based on their setup, we propose a new measurement method for…
TianQin is a proposed space-borne gravitational wave (GW) observatory composed of three identical satellites orbiting around the geocenter with a radius of $10^5$ km. It aims at detecting GWs in the frequency range of 0.1 mHz -- 1 Hz. The…
Space-based gravitational wave (GW) detectors are designed for wave sources in the millihertz band with different locations and orientations. Time-delay interferometry (TDI) technique is an indispensable ingredient in space-borne GW…
The Gravitation Wave (GW) signals from a large number of double white dwarfs (DWDs) in the Galaxy are expected to be detected by space GW detectors, e.g., the Laser Interferometer Space Antenna (LISA), Taiji, and Tianqin in the millihertz…
Currently, the sub-60 Hz sensitivity of gravitational-wave (GW) detectors like Advanced LIGO is limited by the control noises from auxiliary degrees of freedom, which nonlinearly couple to the main GW readout. One particularly promising way…
This work for the first time addresses the feasibility of measuring millihertz gravitational waves (mHz GWs) with a storage ring-based detector. While this overall challenge consists of several partial problems, here we focus solely on…
Space-based gravitational-wave detectors consist of a triangle of three spacecraft, which makes it possible to detect polarization modes of gravitational waves due to the motion of the detectors in space. In this paper we explore the…
We present an approach to experimentally evaluate gravity gradient noise, a potentially limiting noise source in advanced interferometric gravitational wave (GW) detectors. In addition, the method can be used to provide sub-percent…
ASTROD-GW (ASTROD [Astrodynamical Space Test of Relativity using Optical Devices] optimized for Gravitation Wave detection) is an optimization of ASTROD to focus on the goal of detection of gravitation waves. The detection sensitivity is…
Time-delay interferometry is put forward to improve the signal-to-noise ratio of space-borne gravitational wave detectors by canceling the large laser phase noise with different combinations of measured data. Based on the Michelson data…
Time-delay interferometry (TDI) is essential for suppressing laser frequency noise in space-based gravitational wave (GW) observatories such as LISA. However, current second-generation TDI schemes often exhibit undesirable null frequencies…
Any search effort for gravitational waves (GW) using interferometric detectors like LIGO needs to be able to identify if and when noise is coupling into the detector's output signal. The Critical Coupling Likelihood (CCL) method has been…
The Laser Interferometer Gravitational-Wave Observatory forms part of the international effort to detect and study gravitational waves of astrophysical origin. One of the major obstacles for this project with the first generation detectors…
Precise laser alignment in optical cavities is essential for high-precision laser interferometry. We report on a table-top optical experiment featuring two alignment sensing schemes: the conventional Wavefront Sensing (WFS) scheme which…
The orbiting LISA instrument is designed to detect gravitational waves in the millihertz band, produced by sources including galactic binaries and extreme mass ratio inspirals, among others. The detector consists of three spacecraft, each…