Related papers: Inter-Spacecraft Tilt-to-Length Noise Reduction Al…
Laser frequency noise (LFN) is the dominant source of noise expected in the Laser Interferometer Space Antenna (LISA) mission, at $\sim$7 orders of magnitude greater than the typical signal expected from gravitational waves (GWs).…
Tilt-to-length (TTL) coupling, caused by the jitter of test masses or satellites, is a significant noise source in space-based gravitational wave detection. Calibrating and suppressing TTL coupling noise at the sub-nanometer level is…
The space-based gravitational-wave observatory LISA, a NASA-ESA mission to be launched after 2012, will achieve its optimal sensitivity using Time Delay Interferometry (TDI), a LISA-specific technique needed to cancel the otherwise…
The LISA mission is the future space-based gravitational wave (GW) observatory of the European Space Agency. It is formed by 3 spacecraft exchanging laser beams in order to form multiple real and virtual interferometers. The data streams to…
Time-delay interferometry (TDI) is a post-processing technique used to reduce laser noise in heterodyne interferometric measurements with unequal armlengths, a situation characteristic of space gravitational detectors such as Laser…
In this work, we have built an experimental setup to simulate the clock noise transmission with two spacecrafts and two optical links, and further demonstrated the extraction of picometer level signal drowned by the large laser frequency…
Time Delay Interferometry (TDI) is often utilized in the data pre-processing of space-based gravitational wave detectors, primarily for suppressing laser frequency noise. About twenty years ago, assuming armlengths remain constant over…
In the detection of gravitational waves in space, the arm lengths between spacecraft are not equal due to their orbital motion. Consequently, the equal arm length Michelson interferometer used in Earth laboratories is not suitable for…
Taiji program is a space mission aiming to detect gravitational waves in the low frequency band. Taiji-1 is the first technology demonstration satellite of the Taiji Program in Space, with the gravitational reference sensor (GRS) serving as…
The proposed space-borne laser interferometric gravitational wave (GW) observatory TianQin adopts a geocentric orbit for its nearly equilateral triangular constellation formed by three identical drag-free satellites. The geocentric distance…
With a laser interferometric gravitational-wave detector in separate free flying spacecraft, the only way to achieve detection is to mitigate the dominant noise arising from the frequency fluctuations of the lasers via postprocessing. The…
Time Delay Interferometry (TDI) is an indispensable step in the whole data processing procedure of space-based gravitational wave detection, as it mitigates the overwhelming laser frequency noise, which would otherwise completely bury the…
Objects sensed by laser interferometers are usually not stable in position or orientation. This angular instability can lead to a coupling of angular tilt to apparent longitudinal displacement -- tilt-to-length coupling (TTL). In LISA this…
The future space-based gravitational wave observatory LISA will consist of a constellation of three spacecraft in a triangular constellation, connected by laser interferometers with 2.5 million-kilometer arms. Among other challenges, the…
A crucial challenge to the ongoing endeavor of spaceborne gravitational wave (GW) detection resides in the laser phase noise, typically 7 to 8 orders of magnitude above the inevitable noise. The arm locking technique was proposed to…
Clock noise is one of the dominant noises in the space-borne gravitational wave (GW) detection. To suppress this noise, the clock noise-calibrated time-delay-interferometry (TDI) technique is proposed. In this technique, an inter-spacecraft…
Three spacecraft of LISA/TAIJI mission follow their respective geodesic trajectories, and their interferometric arms are unequal and time-varying due to orbital dynamics. Time-delay interferometry (TDI) is proposed to suppress the laser…
LISA is an upcoming ESA mission that will detect gravitational waves in space by interferometrically measuring the separation between free-falling test masses at picometer precision. To reach the desired performance, LISA will employ the…
The Taiji mission, a pioneering Chinese space-borne gravitational wave observatory, requires ultra-precise calibration of its gravitational reference sensors (GRSs) to achieve its targeted sensitivity of $3\times10^{-15} \mathrm{\ m\…
Excess transient noise artifacts, or glitches impact the data quality of ground-based gravitational-wave (GW) detectors and impair the detection of signals produced by astrophysical sources. Mitigation of glitches is crucial for improving…