Related papers: A high-temperature furnace for multi-modal synchro…
In many high-profile applications, such as nuclear fusion and pumping of active media of short-wavelength lasers, it is necessary to achieve high specific input of power of an electromagnetic beam in a target. Diffraction sets the lower…
X-ray Thomson scattering (XRTS) probes the dynamic structure factor of the system, but the measured spectrum is broadened by the combined source-and-instrument function (SIF) of the setup. In order to extract properties such as temperature…
Dielectric resonators are employed to build state-of-the-art low-noise and high- stability oscillators operating at room and cryogenic temperatures. A resonator temperature coefficient of frequency is one criterion of performance. This…
Time-domain thermoreflectance (TDTR) is a widely used technique for characterizing the thermal properties of bulk and thin-film materials. Traditional TDTR analyses typically focus on positive delay time data for fitting, often requiring…
Infra-red (IR) thermography is an essential diagnostic tool for understanding the edge plasma behavior in fusion devices. In this work, we present a new in-house numerical tool, Functional Analysis of Heat Flux (FAHF), for IR thermographic…
Accurate temperature measurements are essential for the proper monitoring and control of industrial furnaces. However, measurement uncertainty is a risk for such a critical parameter. Certain instrumental and environmental errors must be…
This paper presents a numerical simulation and experimental results of a one-dimensional thermal inclinometer with the cavity filled of gas and liquid. The sensor principle consists of one heating resistor placed between two detectors. When…
A versatile Graphene Epitaxy (GrapE) furnace has been designed and fabricated for the growth of epitaxial graphene (EG) on silicon carbide (SiC) under diverse growth environments ranging from high vacuum to atmospheric argon pressure.…
The in situ synchrotron high-energy X-ray powder diffraction (XRD) technique is highly utilized by researchers to analyze the crystallographic structures of materials in functional devices (e.g., battery materials) or in complex sample…
X-ray diffraction with high spatial resolution is commonly used to characterize (poly-)crystalline samples with, for example, respect to local strain, residual stress, grain boundaries and texture. However, the investigation of highly…
In the present work the chemical composition of niobium surface upon 200-400 {\deg}C baking similar to "medium-temperature baking" and "furnace baking" of cavities is explored in-situ by synchrotron X-ray photoelectron spectroscopy (XPS).…
A new set-up to measure acoustic wave velocities through deforming rock samples at high pressures (up to 1000 MPa), temperatures (up to 700$^\circ$C) and differential stress (up to 1500 MPa) has been developed in a recently refurbished gas…
Strong light-matter interactions in silicon metasurfaces give rise to photothermal nonlinearities. While the effect of this strong coupling on light has been extensively studied, its impact on matter remains largely unexplored. Here, we…
When a flat sample of medium density fibreboard (MDF) is exposed to radiant heat in an inert atmosphere, primary crack patterns suddenly start to appear over the entire surface before pyrolysis and any charring occurs. Contrary to common…
This comprehensive study, being part of the European XFEL R\&D effort, elucidates the influence of medium temperature (mid-T) heat treatments between 250{\deg}C and 350{\deg}C on the performance of 1.3~GHz superconducting radiofrequency…
The X-ray Integral Field Unit (X-IFU) is the high resolution X-ray spectrometer of the ESA Athena X-ray observatory. Over a field of view of 5' equivalent diameter, it will deliver X-ray spectra from 0.2 to 12 keV with a spectral resolution…
The dynamical and thermodynamic phase stabilities of the stoichiometric compound CrN including different structural and magnetic configurations are comprehensively investigated using a first-principles density-functional-theory (DFT) plus U…
Data-driven thermal predictors for 3D-ICs are often trained from scratch for each chip design using many high-fidelity finite-element simulations, leading to high data-generation cost and costly cross-design reuse. We propose Therm-FM, a…
The X-ray diffraction, Raman and infrared spectroscopies and magnetic measurements were used to explore the correlated changes of the structure, lattice dynamics and magnetic properties of the LuFeO3 nanoparticles, which appear in…
Majorana fermions are a fascinating medium for discovering new phases of matter. However, the standard analytical tools are very limited in probing the non-perturbative aspects of interacting Majoranas in more than one dimensions. Here, we…